Components

126 components matching “Nano”

A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.

I need

Symbol Footprint 3D model

Parts with a symbol — every component has one.

126 components · page 1 of 6

Matched by name and keywords. Search by meaning instead

TPL5110

SYMFP3D

Timer

Timer, Nano Power, Active-Low, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA, SOT-23-6

Pins: 6
Pads: 6
SMD: 4.1×3.4

LPS22HH

SYMFP3D

Sensor_Pressure

MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, I3C, 0.65 Pa noise rms, ST_HLGA-10L

Pins: 10
Pads: 10
SMD: 2.5×2.5

LPS25HB

SYMFP3D

Sensor_Pressure

MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.01 hPa noise rms, ST_HLGA-10L

Pins: 10
Pads: 10
SMD: 3.0×3.0

TPL5010

SYMFP3D

Timer

Timer, Nano Power, Watchdog, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA

Pins: 6
Pads: 6
SMD: 4.1×3.4

TPL5111

SYMFP3D

Timer

Timer, Nano Power, Active-High, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA, SOT-23-6

Pins: 6
Pads: 6
SMD: 4.1×3.4

LPS22HB

SYMFP3D

Sensor_Pressure

MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.0075 hPa noise rms, ST_HLGA-10L

Pins: 10
Pads: 10
SMD: 2.5×2.5

WSEN-PADS_2511020213301

SYMFP3D

Sensor_Pressure

MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.75 Pa noise rms, ST_HLGA-10L

Pins: 10
Pads: 10
SMD: 2.5×2.5

Arduino_Nano_v3.x

SYMFP—

MCU_Module

Arduino Nano v3.x

Pins: 30
Pads: 30
THT: 18.3×46.2

WS2812B-2020

SYMFP—

LED

RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA

Pins: 4
Pads: 4
SMD: 3.0×2.5

Arduino_Nano_Every

SYMFP—

MCU_Module

Arduino Nano Every

Pins: 30
Pads: 30
THT: 18.3×46.2

Arduino_Nano_v2.x

SYMFP—

MCU_Module

Arduino Nano v2.x

Pins: 30
Pads: 30
THT: 18.3×46.2

BQ25570

SYMFP—

Battery_Management

Nano Power Boost Charger and Buck Converter for Energy Harvester Powered Applications, QFN-20

Pins: 21
Pads: 21
SMD: 4.8×4.8

Arduino_Nano_ESP32

SYMFP—

MCU_Module

Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.

Pins: 30
Pads: 30
THT: 18.3×46.2

JAE_SIM_Card_SF72S006

SYMFP—

Connector

Nano-SIM Card (4FF) connector with Detect Switch

Pins: 9
Pads: 9
SMD: 12.0×15.2

SK6805

SYMFP—

LED

RGB LED with integrated controller

Pins: 4
Pads: 4
SMD: 3.5×2.9

Arduino_Nano_RP2040_Connect

SYMFP—

MCU_Module

Arduino Nano board based on the RP2040 microcontroller with a dual-core 133 MHz ARM Cortex-M0+ processor, 264 kB SRAM, and up to 16 MB flash memory. Operates at 3.3V, with 5V Micro USB input and 4-20V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, and PIO. Includes a 6-axis IMU, RGB LED, microphone, and cryptographic chip for secure communication.

Pins: 30
Pads: 30
THT: 18.3×46.2