Components
283 components matching “X”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
XC7VX550T-FFG1927
FPGA_Xilinx_Virtex7
Virtex 7 XT 550 XC7VX550T-FFG1927
- Pins
- 1920
- Pads
- —
- Mount
- —
XCV150_BG352
FPGA_Xilinx
Virtex FPGA
- Pins
- 352
- Pads
- —
- Mount
- —
XTR111AxDGQ
Interface_CurrentLoop
0-20mA/4-20mA Current Loop Transmitter, Precision Voltage-To-Current, MSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 6.3×3.6
XUY52
Oscillator
Low phase noise, quartz-based PLL oscillator, 0.016-1500 MHz, complementary output
- Pins
- 6
- Pads
- 6
- SMD
- 4.0×5.5
NC7SVU04P5X
74xGxx
High-Speed Logic Inverter, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
MCP6002-xSN
Amplifier_Operational
1MHz, Low-Power Op Amp, SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
MCP6L02x-xMS
Amplifier_Operational
Dual, 1 MHz, 85µA, Rail-to-Rail input and output, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
OPA2333xxDRB
Amplifier_Operational
Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×3.6
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLC27M2xPW
Amplifier_Operational
LinCMOS Precision Dual Operational Amplifiers, VIO_max = 10mV (at 25°C), VDD = 3..16V (C suffix) / VDD = 4..16V (I / M suffix), 525kHz unity-gain bandwidth (VDD = 5V, TA = 25°C), TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
TLV9061xDPW
Amplifier_Operational
10-MHz, RRIO, CMOS Operational Amplifiers for Cost-Sensitive Systems, X2SON
- Pins
- 5
- Pads
- 5
- SMD
- 1.8×1.3
AD5689RxRUZ
Analog_DAC
Dual, 16-Bit nanoDAC+ with 2 ppm/°C Reference, SPI Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
DG418LEUA_Maxim
Analog_Switch
Single SPST 3V Logic Compatible CMOS Analog Switch, normally OFF, 35Ohm Ron, Maxim-variant without Vlogic, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
Conn_01x22_Socket
Connector
Generic connector, single row, 01x22, script generated
- Pins
- 22
- Pads
- —
- Mount
- —
Conn_01x39_Pin
Connector
Generic connector, single row, 01x39, script generated
- Pins
- 39
- Pads
- —
- Mount
- —
Conn_01x50_Pin
Connector
"Generic connector, single row, 01x50, script generated"
- Pins
- 50
- Pads
- —
- Mount
- —
Conn_01x12
Connector_Generic
Generic connector, single row, 01x12, script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 12
- Pads
- —
- Mount
- —
Conn_02x16_Odd_Even
Connector_Generic
Generic connector, double row, 02x16, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 32
- Pads
- —
- Mount
- —
Conn_02x20_Row_Letter_First
Connector_Generic
Generic connector, double row, 02x20, row letter first pin numbering scheme (pin number consists of a letter for the row and a number for the pin index in this row. a1, ..., aN; b1, ..., bN), script generated (kicad-library-utils/schlib/autogen/connector/)
- Pins
- 40
- Pads
- —
- Mount
- —