Components
375 components matching “Pin_”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
BPW34-SMD
Sensor_Optical
Silicon PIN Photodiode, Area 2.65x2.65mm
- Pins
- 2
- Pads
- 2
- SMD
- 8.0×4.5
Arduino_Nano_ESP32
MCU_Module
Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
BPW34
Sensor_Optical
Silicon PIN Photodiode
- Pins
- 2
- Pads
- 2
- THT
- 7.3×4.8
ASMB-MTB1-0A3A2
LED
Tricolor Black Surface LED, Common Anode Pin 4, PLCC-4
- Pins
- 4
- Pads
- 4
- SMD
- 5.0×3.3
LTST-C235KGKRKT
LED
LED dual red/green, 4-pin, down-facing
- Pins
- 4
- Pads
- 4
- SMD
- 5.8×3.4
TC2030
Connector
Tag-Connect’s 6-pins connector
- Pins
- 6
- Pads
- 6
- Mount
- 7.0×4.0
STSPIN220
Driver_Motor
Low voltage stepper motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
Arduino_Nano_RP2040_Connect
MCU_Module
Arduino Nano board based on the RP2040 microcontroller with a dual-core 133 MHz ARM Cortex-M0+ processor, 264 kB SRAM, and up to 16 MB flash memory. Operates at 3.3V, with 5V Micro USB input and 4-20V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, and PIO. Includes a 6-axis IMU, RGB LED, microphone, and cryptographic chip for secure communication.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
STSPIN240
Driver_Motor
Low voltage dual brush DC motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
ASMB-MTB0-0A3A2
LED
Tricolor Black Surface LED, Common Anode Pin 1, PLCC-4
- Pins
- 4
- Pads
- 4
- SMD
- 5.0×3.3
CK_KMS2xxG
Switch
Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm, without pegs, with shield pin
- Pins
- 3
- Pads
- 3
- SMD
- 5.5×4.3
ICE5LP1K-SG48
FPGA_Lattice
iCE40 Ultra FPGA, 1100 LUTs, 1.2V, 48-pin QFN
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
LDK130PU33R_DFN6
Regulator_Linear
300mA low dropout linear regulator, low quiescent current very, low noise, shutdown pin, fixed 3.3V positive output, DFN-6
- Pins
- 6
- Pads
- 6
- SMD
- 1.6×1.4
BP104
Sensor_Optical
Silicon PIN Photodiode
- Pins
- 2
- Pads
- 2
- THT
- 7.3×4.8
TC2050
Connector
Tag-Connect’s 10-pins connector
- Pins
- 10
- Pads
- 10
- Mount
- 10.7×4.6
TA0970B
RF_Filter
Bandpass Filter, 1090MHz, SAW filter 6-pin
- Pins
- 6
- Pads
- 6
- SMD
- 4.5×4.3
CK_KMS2xxGP
Switch
Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm, with pegs, with shield pin
- Pins
- 3
- Pads
- 3
- SMD
- 5.5×4.3
NMJ4HFD2
Connector_Audio
M Series, 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins
- Pins
- 4
- Pads
- 4
- THT
- 33.9×20.2
NMJ6HCD2
Connector_Audio
M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins
- Pins
- 6
- Pads
- 6
- THT
- 27.5×20.2
NMJ6HCD3
Connector_Audio
M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins
- Pins
- 6
- Pads
- 6
- THT
- 27.5×20.2
NMJ6HFD2
Connector_Audio
M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and straight PCB pins
- Pins
- 6
- Pads
- 6
- THT
- 33.9×20.2
STSPIN230
Driver_Motor
Low voltage triple half-bridge motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
STSPIN233
Driver_Motor
Low voltage three phase and three sense motor driver, 1.8V to 10V input, 1.3Arms output, 0.4Ω Rdson per phase (typical), QFN-16 package
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
SiT8008xx-2x-xxE
Oscillator
SiTime Low Power Mems programmable oscillator, 1MHz to 110MHz, PQFN-4, 3.2x2.5mm (with output enable pin)
- Pins
- 4
- Pads
- 4
- SMD
- 4.2×3.6