Components
267 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
INA280A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA280A4xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Gain 200 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA280A5xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Gain 500 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A1xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 20 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A2xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 50 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A4xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 200 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA290A5xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 500 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
INA849D
Amplifier_Instrumentation
Ultra-Low-Noise (1 nV/√Hz), 28 MHz Bandwidth, Instrumentation Amplifier, Supply Range 8V to 36V, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
INA849DGK
Amplifier_Instrumentation
Ultra-Low-Noise (1 nV/√Hz), 28 MHz Bandwidth, Instrumentation Amplifier, Supply Range 8V to 36V, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LTC2311-16
Analog_ADC
16-Bit, 5Msps Differential Input ADC with Wide Input Common Mode Range, LVDS/CMOS interface, MSOP-16
- Pins
- 17
- Pads
- 17
- SMD
- 6.3×4.5
LTC2358-16
Analog_ADC
LTC2358 Buffered Octal, 16 bit, 200ksps/Ch Differential ±10.24V Simultaneous Sampling ADC, 30Vpp common mode range, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
LTC2358-18
Analog_ADC
LTC2358 Buffered Octal, 18 bit, 200ksps/Ch Differential ±10.24V Simultaneous Sampling ADC, 30Vpp common mode range, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
TS3L501ERUA
Analog_Switch
8-Channel SPDT/16-Bit to 8-Bit Multiplexer and Demultiplexer, Ethernet LAN Switch With Power-Down Mode, WQFN-42
- Pins
- 43
- Pads
- 43
- SMD
- 4.8×10.3
YM2612
Audio
Yamaha 6-channel, 4-OP, FM sound generator (with built-in 9-bit DAC), sine-wave LFO, 8-bit PCM channel (DAC mode), DIP-24 (600 mil)
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
YM3438
Audio
Yamaha 6-channel, 4-OP, FM sound generator (with built-in 9-bit DAC), sine-wave LFO, 8-bit PCM channel (DAC mode), CMOS version of YM2612, DIP-24 (600 mil)
- Pins
- 24
- Pads
- 24
- THT
- 17.3×31.0
APW7261
Battery_Management
USB-OTG switch-mode lithium battery charger, WLCSP-20
- Pins
- 20
- Pads
- 20
- SMD
- 3.8×4.0
BQ24133RGY
Battery_Management
Synchronous switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs and power path selector, Texas R-PVQFN-N24
- Pins
- 25
- Pads
- 25
- SMD
- 4.8×6.8
BQ24166RGE
Battery_Management
High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and standard temperature sensing, Texas R-RGE0024H
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ24167RGE
Battery_Management
High efficiency switched mode Li-Ion and Li-Polymer battery charger, integrated MOSFETs, power path selector and JEITA compatible temperature sensing, Texas R-RGE0024H
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25895RTW
Battery_Management
I2C Controlled Single Cell (Li-Ion / Li-Polymer) 5A Fast Charger with MaxCharge, USB BC1.2 Detection, 3.9..14V VBUS, 3.840..4.608V charge voltage range, 1.5 MHz (buck mode) and 500 kHz /1.5 MHz (boost mode), WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7