Components
390 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
MCP6L02x-xMS
Amplifier_Operational
Dual, 1 MHz, 85µA, Rail-to-Rail input and output, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
OPA2333xxDRB
Amplifier_Operational
Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×3.6
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLC27M2xPW
Amplifier_Operational
LinCMOS Precision Dual Operational Amplifiers, VIO_max = 10mV (at 25°C), VDD = 3..16V (C suffix) / VDD = 4..16V (I / M suffix), 525kHz unity-gain bandwidth (VDD = 5V, TA = 25°C), TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
TLV9061xDPW
Amplifier_Operational
10-MHz, RRIO, CMOS Operational Amplifiers for Cost-Sensitive Systems, X2SON
- Pins
- 5
- Pads
- 5
- SMD
- 1.8×1.3
ADG633YCP
Analog_Switch
Triple SPDT CMOS Analog Switch, 52Ohm Ron, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.2×5.2
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MCP6561U
Comparator
Single 1.8V Low-Power Push-Pull Output Comparator, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
RPM3.3-3.0
Converter_DCDC
3A non-isolated switching regulator power module, 3-17V input voltage, 3.3V output voltage, DOSA
- Pins
- 25
- Pads
- 25
- SMD
- 14.2×14.2
KBPC3506W
Diode_Bridge
Single-Phase Bridge Rectifier, 420V Vrms, 35A If, KBPC-W(WS)
- Pins
- 4
- Pads
- 4
- THT
- 29.1×29.1
VS-KBPC110
Diode_Bridge
Single-Phase Bridge Rectifier, 500V Vrms, 3.0A If, KBPC1 package
- Pins
- 4
- Pads
- 4
- THT
- 16.7×16.7
ESH2PB
Diode
100V 2A High Voltage Ultrafast Diode, 25ns reverse recovery time, SMP
- Pins
- 2
- Pads
- 2
- SMD
- 4.6×3.0
ESH2PD
Diode
200V 2A High Voltage Ultrafast Diode, 25ns reverse recovery time, SMP
- Pins
- 2
- Pads
- 2
- SMD
- 4.6×3.0
ZPDxx
Diode
500mW Zener Diode, DO-35
- Pins
- 2
- Pads
- 2
- THT
- 12.3×2.5
MCP25625x-x-SS
Interface_CAN_LIN
Stand-Alone CAN Controller with SPI Interface and integated Transceiver, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
MCP23017x-x-SS
Interface_Expansion
16-bit I/O expander, I2C, interrupts, w pull-ups, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
UA9638CP
Interface_LineDriver
Dual high-speed differential line driver, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
SC16IS752IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
SC16IS762IPW
Interface_UART
Dual UART with I2C/SPI interface, 64 bytes of transmit and receive FIFOs, IrDA SIR built-in support, TSSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 7.7×10.2
MCP2221AxSL
Interface_USB
USB to I2C/UART Protocol Converter with GPIO, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2