Components
361 components matching “Protected”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
WE-TVS-824015043
Power_Protection
Low Capacitance TVS Diode Array, 2 Channels, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
AP9101CK
Battery_Management
Li+ Battery Protection IC for Single Cell Pack, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ESD131-B1-W0201
Diode
Bidirectional ESD protection diode, ±5.5Vrwm, 0.23pF, SG-WLL-2-3
- Pins
- 2
- Pads
- 2
- SMD
- 1.1×0.8
ISOW1044
Interface_CAN_LIN
Isolated CAN FD Transceiver, Integrated DC-DC Converter, 5Mbps, Reinforced Isolation, SOIC-20W
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
ISL3178E
Interface_UART
20Mbps, 3.3V RS-485 transceiver, ±15-kV IEC ESD protection, -7V..+12V common mode voltage, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX481E
Interface_UART
Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, with low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
THVD1420D
Interface_UART
Half duplex RS-485/RS-422, 12 Mbps, 3V - 5.5V supply, ±12kV electro-static discharge (ESD) protection, with receiver/driver enable, 32 receiver drive capacity, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADUM3160
Interface_USB
Full/Low Speed, iCoupler USB Digital Isolator, 2.5kV protection
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
TXB0106PW
Logic_LevelTranslator
6-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
TXB0108RGY
Logic_LevelTranslator
8-Bit Bidirectional Voltage-Level Translator, Auto Direction Sensing and ±15-kV ESD Protection, 1.2 - 3.6V APort, 1.65 - 5.5V BPort, VQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.4×5.4
LM5060
Power_Management
High side protection controller, +5.5V to +65V operation, VSSOP-10 package
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
LM74700
Power_Management
Low Iq reverse battery protection ideal diode controller, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ESDA5V3L
Power_Protection
TVS Diode Array, 5.5V Standoff, 2 Channels, SOT23
- Pins
- 3
- Pads
- 3
- SMD
- 4.1×3.4
ESDA6V1BC6
Power_Protection
Quad bidirectional transil, Suppressor for ESD protection, 5V Standoff, 4 Channels, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
PESD3V3L4UF
Power_Protection
Low capacitance unidirectional quadruple ESD protection diode array, 3.3V, Common Anode, SOT-886
- Pins
- 6
- Pads
- 6
- SMD
- 1.5×2.0
PESD3V3L4UG
Power_Protection
Low capacitance unidirectional quadruple ESD protection diode array, 3.3V, Common Anode, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
PESD5V0L4UF
Power_Protection
Low capacitance unidirectional quadruple ESD protection diode array, 5.0V, Common Anode, SOT-886
- Pins
- 6
- Pads
- 6
- SMD
- 1.5×2.0
TPD2E2U06DCK
Power_Protection
Dual-Channel High-Speed ESD Protection, SC-70
- Pins
- 3
- Pads
- 3
- SMD
- 2.9×2.2
TPD2S017
Power_Protection
2-Channel Ultra-Low Clamp Voltage ESD Solution With Series-Resistor Isolation, SOT-23
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
PESD5V0L1ULD
Diode
Low capacitance unidirectional ESD protection diode, 5V, SOD-882D
- Pins
- 2
- Pads
- 2
- SMD
- 1.8×1.2
ADM3053
Interface_CAN_LIN
Isolated CAN Transceiver, integrated isolated DC-DC converter, 1Mbps
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
MAX14783ExS
Interface_UART
High-Speed 3.3V/5V RS-485/RS-422 Transceiver with ±35kV HBM ESD Protection, SOIC8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX3072E
Interface_UART
+3.3V, ±15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MAX487E
Interface_UART
Half duplex RS-485/RS-422, 0.25 Mbps, ±15kV electro-static discharge (ESD) protection, with slew-rate, with low-power shutdown, with receiver/driver enable, 128 receiver drive capability, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4