Components
637 components matching “USB_A”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
CH340T
Interface_USB
USB serial converter, UART, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
FT2232D
Interface_USB
Full Speed Double Channel USB UART/FIFO, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
CY7C68013A-56LTX
MCU_Cypress
CYPRESS FX2LP USB Microcontroller, 48MHz 8051, 16KB RAM, USB 2.0, I2C, QFN-56
- Pins
- 57
- Pads
- 57
- SMD
- 9.2×9.2
RaspberryPi_Pico_Debug
MCU_Module
Versatile and inexpensive microcontroller module (with debug pins) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2
- Pins
- 43
- Pads
- 43
- SMD
- 23.1×53.9
RaspberryPi_Pico_W_Extensive
MCU_Module
Versatile and inexpensive wireless microcontroller module (with full pinout for test point and debug connections) powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash, Infineon CYW43439 2.4GHz 802.11n wireless LAN; also supports Raspberry Pi Pico 2 W
- Pins
- 49
- Pads
- 49
- SMD
- 23.1×53.9
AAT4610BIGV-1-T1
Power_Management
Current Limited Load Switch, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
WE-TVS-824015043
Power_Protection
Low Capacitance TVS Diode Array, 2 Channels, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
MAX1811
Battery_Management
USB Powered Li+ Charger, 4.1V/4.2V battery, 5V input, 0.1/0.5A charging current
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADUM3160
Interface_USB
Full/Low Speed, iCoupler USB Digital Isolator, 2.5kV protection
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
CH340K
Interface_USB
USB serial converter, UART, SSOP-10
- Pins
- 11
- Pads
- 11
- SMD
- 7.5×5.4
FT200XD
Interface_USB
Full Speed USB to I2C Bridge, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
IP2721
Interface_USB
USB TYPEC PD Controller Interface, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
MCP2221AxML
Interface_USB
USB to I2C/UART Protocol Converter with GPIO, QFN-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.2×5.2
MCP2221AxST
Interface_USB
USB to I2C/UART Protocol Converter with GPIO, TSSOP-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.7×5.5
TUSB2036
Interface_USB
2- or 3-Port USB1.1 HUB with optional serial EEPROM
- Pins
- 32
- Pads
- 32
- SMD
- 10.4×10.4
USB3300-EZK
Interface_USB
Hi-Speed USB Host, Device or OTG PHY with ULPI Interface
- Pins
- 33
- Pads
- 33
- SMD
- 6.3×6.3
CY7C68013A-56PVX
MCU_Cypress
CYPRESS FX2LP USB Microcontroller, 48MHz 8051, 16KB RAM, USB 2.0, I2C, SSOP-56
- Pins
- 56
- Pads
- 56
- SMD
- 11.1×19.1
ATxmega16A4U-A
MCU_Microchip_ATmega
32MHz, 16kB Flash, 4kB Boot, 2kB SRAM, 1kB EEPROM, JTAG, USB, TQFP-44
- Pins
- 44
- Pads
- 44
- SMD
- 13.3×13.3
PIC18F45K50_QFP
MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB in TQFP-44 package
- Pins
- 44
- Pads
- 44
- SMD
- 13.3×13.3
AP22804AW5
Power_Management
Current limited 2.5A power switch, single channel, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
AP22814AW5
Power_Management
Current limited 3A power switch, single channel, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TPS2041B
Power_Management
Single power-distribution switcher
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TPS2051CDBV
Power_Management
0.5A Current limited power switch, single channel, output discharge, reverse blocking, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
ESDA5V3L
Power_Protection
TVS Diode Array, 5.5V Standoff, 2 Channels, SOT23
- Pins
- 3
- Pads
- 3
- SMD
- 4.1×3.4