Components
16,069 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
SYM_ESD_Large
Graphic
ESD warning/"Do not touch" symbol, large
- Pins
- —
- Pads
- —
- Mount
- —
MCP2558FD-xMNY
Interface_CAN_LIN
CAN FD Transceiver with Silent Mode, up to 8 Mbps, TDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×2.5
MCP2561-E-P
Interface_CAN_LIN
High-Speed CAN Transceiver, 1Mbps, 5V supply, SPLIT pin, -40C to +125C, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
VSC8541XMV-0x
Interface_Ethernet
Single Port Gigabit Ethernet, GMII/RGMII/MII/RMII Interfaces, QFN-68
- Pins
- 69
- Pads
- 69
- SMD
- 9.2×9.2
TCA9535MRGER
Interface_Expansion
16-bit I/O expander, I2C and SMBus interface, interrupts, w/o pull-ups, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LTC6957xMS-3
Interface
Low Phase Noise, Dual Output Buffer/Driver/Logic Converter, CMOS In-Phase Outputs, MSOP-12
- Pins
- 12
- Pads
- 12
- SMD
- 6.3×4.5
MAX202
Interface_UART
Dual RS232 driver/receiver, 5V supply, 120kb/s, 0C-70C
- Pins
- 16
- Pads
- —
- Mount
- —
MAX3486
Interface_UART
True RS-485/RS-422, 2.5Mbps, Slew-Rate Limited, with low-power shutdown, with receiver/driver enable, 32 receiver drive capacitity, DIP-8 and SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
FSUSB30MUX
Interface_USB
Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.2×3.5
MCP2200-I-MQ
Interface_USB
USB 2.0 to UART Protocol Converter with GPIO, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
ADuM1400xRW
Isolator
Quad Channel Digital Isolator, 10Mbps, SOIC-16
- Pins
- 16
- Pads
- 16
- SMD
- 11.9×10.8
TCMT4600
Isolator
Quad AC/DC Phototransistor Optocoupler, Vce 70V, CTR 80-300%, SOP16
- Pins
- 16
- Pads
- 16
- SMD
- 8.6×10.8
FXMA108
Logic_LevelTranslator
Dual-Supply, 8-Bit Signal Translator with Configurable Voltage Supplies and Signals Levels, 3-State Outputs and Auto Direction Sensing, WQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.0×6.0
ATmega1284P-A
MCU_Microchip_ATmega
20MHz, 128kB Flash, 16kB SRAM, 4kB EEPROM, JTAG, TQFP-44
- Pins
- 44
- Pads
- 44
- SMD
- 13.3×13.3
ATmega168P-20A
MCU_Microchip_ATmega
20MHz, 16kB Flash, 1kB SRAM, 512B EEPROM, TQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.3×10.3
ATmega168PA-P
MCU_Microchip_ATmega
20MHz, 16kB Flash, 1kB SRAM, 512B EEPROM, DIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
ATmega2561-16A
MCU_Microchip_ATmega
16MHz, 256kB Flash, 8kB SRAM, 4kB EEPROM, JTAG, TQFP-64
- Pins
- 64
- Pads
- 64
- SMD
- 17.3×17.3
ATmega328P-MM
MCU_Microchip_ATmega
20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 5.2×5.2
ATmega32A-A
MCU_Microchip_ATmega
16MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, JTAG, TQFP-44
- Pins
- 44
- Pads
- 44
- SMD
- 13.3×13.3
ATmega88-20A
MCU_Microchip_ATmega
20MHz, 8kB Flash, 1kB SRAM, 512B EEPROM, TQFP-32
- Pins
- 32
- Pads
- 32
- SMD
- 10.3×10.3
ATtiny2313A-M
MCU_Microchip_ATtiny
20MHz, 2kB Flash, 128B SRAM, 128B EEPROM, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
ATtiny24-20M
MCU_Microchip_ATtiny
20MHz, 2kB Flash, 128B SRAM, 128B EEPROM, debugWIRE, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
ATtiny817-M
MCU_Microchip_ATtiny
20MHz, 8kB Flash, 512B SRAM, 128B EEPROM, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
ATSAMD09C13A-SS
MCU_Microchip_SAMD
ARM Cortex-M0+ MCU, 48MHz, 8KB Flash, 4KB RAM, 2.4-3.6V, 12 GPIO, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2