Components
385 components matching “G”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TLV9061xDPW
Amplifier_Operational
10-MHz, RRIO, CMOS Operational Amplifiers for Cost-Sensitive Systems, X2SON
- Pins
- 5
- Pads
- 5
- SMD
- 1.8×1.3
MCP4921-ESN
Analog_DAC
Single 12-bit Digital to Analog Converter, SPI Interface, SOIC-8
- Pins
- 8
- Pads
- —
- Mount
- —
MAX14778
Analog_Switch
Dual ±25V Above- and Below-the-Rails 4:1 Analog Multiplexer, TQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 6.2×6.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LTC4002EDD-4.2
Battery_Management
Standalone Li-Ion Switch Mode Battery Charger, 4.7-22V input, single cell, DFN-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.3×3.7
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
MIC845N
Comparator
Micro-Power Comparator / Battery Monitor, Active-High Open-Drain Output, SC-70-5
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
ATA00F18S-L
Converter_DCDC
Artesyn 2W Isolated DC/DC Converter Module, 3.3V Output Voltage, 9-36V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
OKI-78SR-3.3_1.5-W36-C
Converter_DCDC
1.5A Step-Down DC/DC-Regulator, 7-36V input, 3.3V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, OKI-78SR_Vertical
- Pins
- 3
- Pads
- 3
- THT
- 10.9×8.8
TBA1-0512
Converter_DCDC
1W DC/DC converter unregulated, 4.5-5.5V input, 12V output voltage, 80mA output, 1.5kVDC isolation, SIP-4
- Pins
- 4
- Pads
- 4
- THT
- 7.5×13.2
TEC2-1212WI
Converter_DCDC
2W DC/DC industrial converter regulated, 4.5-18V input, 12V fixed output voltage, 167mA output, 1.6kVDC isolation, SIP-8
- Pins
- 7
- Pads
- 7
- THT
- 10.6×23.3
THN10-7215UIR
Converter_DCDC
10W DC/DC railway converter regulated, 14-160V input, 24V fixed output voltage, 420mA output, 3.0kVDC isolation, 1"x1"
- Pins
- 7
- Pads
- 7
- THT
- 26.9×26.9
TMA-1515D
Converter_DCDC
1W DC/DC converter unregulated, 13.5-16.5V input, ±15V output voltage, 34mA each output, 1.0kVDC isolation, SIP-7
- Pins
- 5
- Pads
- 5
- THT
- 7.6×20.0
TMA-2405D
Converter_DCDC
1W DC/DC converter unregulated, 21.6-26.4V input, ±5V output voltage, 100mA each output, 1.0kVDC isolation, SIP-7
- Pins
- 5
- Pads
- 5
- THT
- 7.6×20.0
TMV1205D
Converter_DCDC
1W DC/DC converter unregulated, 10.8-13.2V input, ±5V output voltage, 100mA each output, 3.0kVDC isolation, SIP-7
- Pins
- 5
- Pads
- 5
- THT
- 7.1×20.5
TRI10-2413
Converter_DCDC
10W DC/DC industrial converter regulated, 18-36V input, 15V fixed output voltage, 666mA output, 5.0kVAC isolation, DIP-24
- Pins
- 5
- Pads
- 5
- THT
- 21.8×33.3
TSR0.5-24120
Converter_DCDC
0.5A step-down regulator, fixed 12V output voltage, 15-32V input voltage, TO-220 compatible LM78xx replacement, SIP-3
- Pins
- 3
- Pads
- 3
- THT
- 9.1×13.0
L
Device
Inductor
- Pins
- 2
- Pads
- —
- Mount
- —