Components
637 components matching “USB_A”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
AP22804BW5
Power_Management
Current limited 2.5A power switch, single channel, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
FPF2004
Power_Management
Single power-distribution switcher, current limit = 100mA, blanking time = 10 ms, auto-restart time = 80 ms, ON Pin Polarity = HIGH, SOT-353
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
TPS2042D
Power_Management
Dual power-distribution switcher
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TPS2044D
Power_Management
Quad power-distribution switcher
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
TPS2065CDBV
Power_Management
1A Current limited power switch, single channel, output discharge, reverse blocking, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
DT1240A-08LP3810
Power_Protection
Low Capacitance TVS Diode Array, 3.3V Standoff, 8 Channels, UDFN-9
- Pins
- 9
- Pads
- 9
- SMD
- 2.1×4.3
ESDA5V3SC5
Power_Protection
Quad TVS Diode Array, 5.3V Standoff, 4 Channels, 400W, ±30kV, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
IP4234CZ6
Power_Protection
ESD Protection, 2 channel, USB 2.0 to IEC 61000-4-2 level 4, 5.5V, SOT457 (SC-74-6)
- Pins
- 6
- Pads
- 6
- SMD
- 4.4×3.4
SP0504BAHT
Power_Protection
TVS Diode Array, 5.5V Standoff, 4 Channels, SOT-23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
SP0504BAJT
Power_Protection
TVS Diode Array, 5.5V Standoff, 4 Channels, SC-70-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
SP0505BAJT
Power_Protection
TVS Diode Array, 5.5V Standoff, 5 Channels, SC-70-6 package
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
AP22615AWU
Regulator_Linear
Current limited power switch, single channel, 3.0V to 5.5V, 3A, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ25886RGE
Battery_Management
Standalone 2-Cell (Li-Ion / Li-Polymer), 2A Boost-Mode Battery Charger With PowerPath, USB BC1.2 Detection, USB On-The-Go Boost (OTG), 4.3..6.2V VBUS, 8.2/8.4/8.7/8.8V charge voltage, 9.2V BATOVP, 1.5MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
BQ25887RGE
Battery_Management
I2C Controlled 2-Cell (Li-Ion / Li-Polymer), 2A boost-mode battery charger with cell balancing for USB input, 3.9..6.2V VBUS, 3.4..4.6V charge voltage regulation range (per cell), 1.5 MHz, VQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
LTC4055
Battery_Management
USB Power Controller and Li-Ion Charger (4.2V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
LTC4055-1
Battery_Management
USB Power Controller and Li-Ion Charger (4.1V Float Voltage)
- Pins
- 17
- Pads
- 17
- SMD
- 5.3×5.3
USB3318
gekkio-Gekkio_Interface_USB
Hi-Speed USB ULPI Transceiver, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.2×5.2
PIC18F45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
PIC18LF45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
CH376T
Interface
File Management USB Flash Card SD Interface, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
AP33771
Interface_USB
USB Type-C PD Sink Controller, QFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
AP33772SDKZ-xx-FA02
Interface_USB
USB Type-C PD3.1 Sink Controller, EPR/AVS up to 28V, SPR/AVS up to 21V, I2C interface, WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
CH221K
Interface_USB
USB-PD & Type-C & Fast Charge Power Sink Controller, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4