Components
455 components matching “SPI”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
ADS7843EG4
Driver_Display
Single-supply, 12bit, 4 ch, touch screen driver, 2.2 - 5.25 VDD, -40 to +85 C, QSPI, SPI, 3-wire serial interface, SSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
ADS7843IDBQRQ1
Driver_Display
Single-supply, 12bit, 4 ch, touch screen driver, 2.2 - 5.25 VDD, -40 to +125 C, QSPI, SPI, 3-wire serial interface, SSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
STGAP1AS
Driver_FET
Galvanically isolated 5 A advanced single gate driver, Dual Output, Miller Clamp, Sense, Desaturation, UVLO, OVLO, SPI, AEC-Q100, SOIC-24
- Pins
- 24
- Pads
- 24
- SMD
- 11.9×15.9
MAX7221xRG
Driver_LED
Serially Interfaced, 8-Digit LED Display Driver, CDIP-24
- Pins
- 24
- Pads
- 24
- THT
- 9.7×31.0
DRV8311P
Driver_Motor
Three-Phase PWM Motor Driver, 3-20V supply, 5A peak current, SPI / tSPI interface, WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 3.9×3.9
DRV8311S
Driver_Motor
Three-Phase PWM Motor Driver, 3-20V supply, 5A peak current, SPI interface, WQFN-24
- Pins
- 25
- Pads
- 25
- SMD
- 3.9×3.9
TUSS4470
Driver
Direct Drive Ultrasonic Sensor IC with Logarithmic Amplifier, WQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.3×5.3
DSPIC33EP256MU810-xPT
DSP_Microchip_DSPIC33
High-Performance, 16-bit Digital Signal Controller, 40MIPS, 256k Flash, 30k SRAM, TQFP-100
- Pins
- 100
- Pads
- 100
- SMD
- 17.3×17.3
DSPIC33FJ64MC802-xSP
DSP_Microchip_DSPIC33
40 MIPS, 64k Flash, 16k SRAM, DIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
ESP32-PICO-V3
espressif-Espressif
The ESP32-PICO-V3 is a System-in-Package (SiP) device that is based on ESP32 with ECO V3 wafer, providingcomplete Wi-Fi and Bluetooth®functionalities. It integrates a 4 MB SPI flash.
- Pins
- 42
- Pads
- 49
- SMD
- 8.3×8.3
PIC18F45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
PIC18LF45K50-IP
gekkio-Gekkio_MCU_Microchip_PIC18
32K Flash, 2K RAM, 256B EEPROM, Microchip PIC18F series enhanced flash microcontroller with USB, DIP-40
- Pins
- 40
- Pads
- 40
- THT
- 17.3×51.3
23K256xSN
gekkio-Gekkio_Memory_RAM
256k SPI Bus Low-Power Serial SRAM, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
23K256xST
gekkio-Gekkio_Memory_RAM
256k SPI Bus Low-Power Serial SRAM, TSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.7×3.5
IS62WVS5128GBLL-xxNLx
gekkio-Gekkio_Memory_RAM
4Mb (512k x 8), 2.7-3.6V, Low Voltage, Fast Serial SRAM with SPI, SDI, and SQI interface, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
MCP251863T-H-SS
Interface_CAN_LIN
External CAN FD Controller with Integrated Transceiver, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
MCP25625x-x-ML
Interface_CAN_LIN
Stand-Alone CAN Controller with SPI Interface and integated Transceiver, VQFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 7.2×7.2
MCP25625x-x-SS
Interface_CAN_LIN
Stand-Alone CAN Controller with SPI Interface and integated Transceiver, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
TCAN4551RGYRQ1
Interface_CAN_LIN
CAN-FD controller with integrated transceiver, 5Mbps, 3.3V to 5V supply, SPI interface, VQFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.4×5.4
TJA1145T
Interface_CAN_LIN
High-speed CAN transceiver for partial networking, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
TJA1145T-FD
Interface_CAN_LIN
High-speed CAN transceiver for partial networking with FD-passive function, SOIC-14
- Pins
- 14
- Pads
- 14
- SMD
- 7.4×9.2
ENC424J600-PT
Interface_Ethernet
Stand-Alone 10/100 Ethernet Controller with SPI or Parallel Interface, TQFP-44
- Pins
- 44
- Pads
- 44
- SMD
- 13.3×13.3
MCP23S17x-x-ML
Interface_Expansion
16-bit I/O expander, SPI, interrupts, w pull-ups, QFN-28
- Pins
- 29
- Pads
- 29
- SMD
- 7.2×7.2
MCP23S17x-x-SO
Interface_Expansion
16-bit I/O expander, SPI, interrupts, w pull-ups, SOIC-28
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4