Components
455 components matching “SPI”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
MCP23S17x-x-SP
Interface_Expansion
16-bit I/O expander, SPI, interrupts, w pull-ups, SPDIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
MCP23S17x-x-SS
Interface_Expansion
16-bit I/O expander, SPI, interrupts, w pull-ups, SSOP-28
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
MCP23S18x-x-SO
Interface_Expansion
16-bit I/O expander, SPI interface, open-drain outpus (with configurable pull-up resistors), 2 interrupt outputs, SOIC-28
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4
MCP23S18x-x-SP
Interface_Expansion
16-bit I/O expander, SPI interface, open-drain outpus (with configurable pull-up resistors), 2 interrupt outputs, DIP-28
- Pins
- 28
- Pads
- 28
- THT
- 9.7×36.1
SC18IS604PW
Interface_Expansion
SPI to I2C interface, 5 GPIO, +1.71 to +3.6V supply, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
SC18IS606PW
Interface_Expansion
I2C to SPI bridge, 1.71 to 3.6V supply, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
CH341A
Interface_USB
USB to UART / printer port / parallel port / 2-wire / 4-wire, SOIC-28 (SOP-28)
- Pins
- 28
- Pads
- 28
- SMD
- 11.9×18.4
FT220XS
Interface_USB
Full Speed USB to 4-Bit SPI / FT1248 Bridge, SSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
FT221XQ
Interface_USB
Full Speed USB to 8-Bit SPI / FT1248 Bridge, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
FT221XS
Interface_USB
Full Speed USB to 8-Bit SPI / FT1248 Bridge, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
GL3224-ONY
Interface_USB
USB 3.0 Dual LUN Memory Card Reader Controller, external firmware support (SPI Flash Memory), WQFN-48
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
MCP2210x-SO
Interface_USB
USB to SPI Protocol Converter with GPIO, SOIC-20
- Pins
- 20
- Pads
- 20
- SMD
- 11.9×13.3
MCP2210x-SS
Interface_USB
USB to SPI Protocol Converter with GPIO, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
ADuM3151
Isolator
3.75kV 7-Channel SPI Isolator, 1 Reverse Channel, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
ADuM3152
Isolator
3.75kV 7-Channel SPI Isolator, 2 Reverse Channels, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
ADuM3153
Isolator
3.75kV 7-Channel SPI Isolator, 3 Reverse Channels, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 9.4×7.7
MCP3208-CI/SL
kiml-00-kiml-analog-adc
A/D Converter, 12-Bit, 8-Channel, SPI Interface , 2.7V-5.5V
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×10.4
W5500
kiml-00-kiml-interface_ethernet
10/100Mb SPI Ethernet controller with TCP/IP stack, LQFP-48
- Pins
- 48
- Pads
- 48
- SMD
- 10.3×10.3
LIS2DW12TR
kiml-00-kiml-sensor-motion
3-Axis Accelerometer, 2/4/8g range, I2C/SPI interface
- Pins
- 12
- Pads
- 12
- SMD
- 2.5×2.5
LSM303AGRTR
kiml-00-kiml-sensor-motion
ultra-low-power 3D accelerometer and 3D magnetometer, 2/4/8/16g range, I2C/SPI interface
- Pins
- 12
- Pads
- 12
- SMD
- 2.5×2.5
ADUC816BSZ
MCU_AnalogDevices
MicroConverter, Dual-Channel 16-bit ADCs with Embedded Flash MCU, 12-bit DAC, 256 Bytes User RAM, 8KB Flash/EE Program Memory, 640 Bytes Flash/EE Data Memory, PQFP-52 (MQFP-52, case S-52-2)
- Pins
- 52
- Pads
- 52
- SMD
- 15.2×15.2
PIC18F23K20_ISS
MCU_Microchip_PIC18
8K Flash, 512Byte RAM, 256Byte EEPROM, PIC18 Microcontroller ADC PWM SPI I2C USART in SSOP28 package
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
PIC18F24K20_ISS
MCU_Microchip_PIC18
16K Flash, 768Byte RAM, 256Byte EEPROM, PIC18 Microcontroller ADC PWM SPI I2C USART in SSOP28 package
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7
PIC18F25K20_ISS
MCU_Microchip_PIC18
32K Flash, 1536Byte RAM, 256Byte EEPROM, PIC18 Microcontroller ADC PWM SPI I2C USART in SSOP28 package
- Pins
- 28
- Pads
- 28
- SMD
- 9.4×10.7