Components
1,738 components matching “Single”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
OPA551P
Amplifier_Operational
High-Voltage High-Current Operational Amplifier, bandwidth 3MHz, slew-rate 15V/us, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
OPA552P
Amplifier_Operational
High-Voltage High-Current Operational Amplifier, bandwidth 12MHz, slew-rate 24V/us, DIP-8
- Pins
- 8
- Pads
- 8
- THT
- 9.7×10.7
OPA810xDBV
Amplifier_Operational
140-MHz, Rail-to-Rail Input and Output, FET-Input Operational Amplifier, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA842xDBV
Amplifier_Operational
200MHz, Low Distortion, Unity-Gain Stable, Voltage Feedback Operational Amplifier, SOT23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
OPA890xD
Amplifier_Operational
Single Low-Power, Wideband, Voltage-Feedback Operational Amplifier with Disable, SO-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
TLV9301xDBV
Amplifier_Operational
40-V, 1-MHz, RRO Operational Amplifiers for Cost-Sensitive Systems, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
TSV911xxLx
Amplifier_Operational
Single rail-to-rail input/output 8 MHz operational amplifiers, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
AD5593R
Analog
8-channel 12bits configurable ADC/DAC/GPIO Internal Reference, I2C interface Integrated temperature sensor,Single Supply, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
ADS1013IDGS
Analog_ADC
Ultra-Small, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference and Oscillator, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
ADS1014IDGS
Analog_ADC
Ultra-Small, Low-Power, I2C-Compatible, 3.3-kSPS, 12-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
ADS1114IDGS
Analog_ADC
Ultra-Small, Low-Power, I2C-Compatible, 860-SPS, 16-Bit ADCs With Internal Reference, Oscillator, and Programmable Comparator, VSSOP-10
- Pins
- 10
- Pads
- 10
- SMD
- 6.3×3.5
MAX11613
Analog_ADC
4-channel single-ended or 2-channel, differential, 12-bit ADC, I2C, 2.048V internal reference, 8-MSOP package
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
MCP3425Axx-xCH
Analog_ADC
Single Delta-Sigma 16bit Analog to Digital Converter, I2C Interface, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
ADS7830
Analog_DAC
Single-supply, 8bit, 8 ch, SAR, 70kHz SR, 2.7 - 5 VDD, I2C, TSSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.7×5.5
DAC5311xDCK
Analog_DAC
8-Bit, Single-Channel, Voltage Output, Serial Interface Digital-to-Analog Converters, SC-70
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
ADG419BR
Analog_Switch
Single SPDT Monolithic LC²MOS Analog Switch, 25Ohm Ron, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
ADG419BRM
Analog_Switch
Single SPDT Monolithic LC²MOS Analog Switch, 25Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
DG419LDY_Maxim
Analog_Switch
Single SPDT 3V Logic Compatible CMOS Analog Switch, 35Ohm Ron, Maxim-variant without Vlogic, SOIC-8
- Pins
- 8
- Pads
- 8
- SMD
- 7.4×5.4
NC7SB3157P6X
Analog_Switch
Single SPDT Low-Voltage Analog Switch or 2:1 Multiplexer/De-Multiplexer Bus Switch, 10Ohm Ron, SC-70-6
- Pins
- 6
- Pads
- 6
- SMD
- 2.9×2.2
TS5A63157DBV
Analog_Switch
Single SPDT Analog Switch, 5V/3.3V Single-Supply Operation, 12Ohm Ron, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
BQ25601
Battery_Management
I2C Controlled 3A Single-Cell Battery Charger for High Input Voltage and Narrow Voltage DC Power Path Management, WQFN-32
- Pins
- 25
- Pads
- 25
- SMD
- 5.3×5.3
LC709203FQH-01TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 01, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
MCP73831-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4