Components
281 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
INA290A3xDCK
Amplifier_Current
Current Sense Amplifier, 2.7-V to 120-V Common Mode, 1.1-MHz, Ultra Precise, Gain 100 V/V, SC-70
- Pins
- 5
- Pads
- 5
- SMD
- 2.9×2.2
OPA2333xxDRB
Amplifier_Operational
Dual 1.8V, microPower, CMOS Operational Amplifiers, Zero-Drift Series, SON-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.2×3.6
OPA365xxDBV
Amplifier_Operational
50-MHz, Zero-Crossover, Low-Distortion, High CMRR, RRI/O, Single-Supply, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
LTC2508CDKD-32
Analog_ADC
32-Bit Oversampling ADC with Configurable Digital Filter, 0°C to 70°C, DFN-24 package
- Pins
- 25
- Pads
- 25
- SMD
- 5.0×7.6
ADG633YCP
Analog_Switch
Triple SPDT CMOS Analog Switch, 52Ohm Ron, LFCSP-16
- Pins
- 17
- Pads
- 17
- SMD
- 5.2×5.2
MAX324CUA
Analog_Switch
Dual SPST CMOS Analog Switches, normally ON, 60Ohm Ron, MSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
LC709203FQH-02TWG
Battery_Management
Single LiPo battery fuel gauge, I2C, type 02, WDFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 5.2×3.5
LP3947
Battery_Management
Single Cell Li-Ion LDO Battery Charger IC, Up to 1A, Support USB charging scheme
- Pins
- 15
- Pads
- 15
- SMD
- 4.9×4.5
MAX1873REEE
Battery_Management
Charger for 2 lithium-ion (Li+), 5/6 NickelCadium (NiCD) cells or 5/6 NickelMetalHydride (NiMH), 9 to 28V VDD, -40 to +85 degree Celsius, QSOP-16
- Pins
- 16
- Pads
- 16
- SMD
- 7.4×5.4
MCP73831-3-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, Tri-State Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73832-5-OT
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.50V, Open-Drain Status Output, in SOT23-5 package
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
MCP73871-3CA
Battery_Management
Single cell, Li-Ion/Li-Po charge management controller, 4.35V, 6h safety timer
- Pins
- 21
- Pads
- 21
- SMD
- 5.2×5.2
HLK-30M05C
Converter_ACDC
Compact AC/DC board mount power module 30W 5V
- Pins
- 4
- Pads
- 4
- THT
- 60.0×36.0
ATA00CC36S-L
Converter_DCDC
Artesyn 3W Isolated DC/DC Converter Module, ±15V Output Voltage, 18-75V Input Voltage
- Pins
- 7
- Pads
- 7
- SMD
- 19.8×24.5
ITX2403SA
Converter_DCDC
XP Power 6W, 1000 VDC Isolated DC/DC Converter Module, Fully Regulated Single Output Voltage 3.3V, ±1300mA, 24V Input Voltage, SIP
- Pins
- 5
- Pads
- 5
- THT
- 11.7×24.4
LMZM23600
Converter_DCDC
0.5A Adjustable Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
LMZM23600V3
Converter_DCDC
0.5A 3.3V Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
LMZM23601V3
Converter_DCDC
1A 3.3V Step-Down DC/DC Power Module in 3.8x3mm, MicroSIP-10
- Pins
- 11
- Pads
- 11
- SMD
- 4.4×3.5
NCS1S1203SC
Converter_DCDC
Isolated 1W 4:1 input DC/DC converter module, 4.5-18V input voltage, 3.3V output voltage, SIP
- Pins
- 5
- Pads
- 5
- THT
- 23.1×9.3
OKI-78SR-3.3_1.5-W36-C
Converter_DCDC
1.5A Step-Down DC/DC-Regulator, 7-36V input, 3.3V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, OKI-78SR_Vertical
- Pins
- 3
- Pads
- 3
- THT
- 10.9×8.8
RPM3.3-3.0
Converter_DCDC
3A non-isolated switching regulator power module, 3-17V input voltage, 3.3V output voltage, DOSA
- Pins
- 25
- Pads
- 25
- SMD
- 14.2×14.2
TEL12-2413WI
Converter_DCDC
0.8A Isolated DC/DC Converter Module, fixed 15V Output Voltage, 9-36V Input Voltage, 12W
- Pins
- 5
- Pads
- 5
- THT
- 14.2×24.3
TRI10-2413
Converter_DCDC
10W DC/DC industrial converter regulated, 18-36V input, 15V fixed output voltage, 666mA output, 5.0kVAC isolation, DIP-24
- Pins
- 5
- Pads
- 5
- THT
- 21.8×33.3
1SS355VM
Diode
90V 0.1A high speed switching Diode, SOD-323F
- Pins
- 2
- Pads
- 2
- SMD
- 3.2×1.9