Components
17 components matching “nano”
A component is a schematic symbol with, where the catalog has them, its footprint and 3D package model — linked by KiCad's own references and cross-checked pin by pin.
TPL5110
Timer
Timer, Nano Power, Active-Low, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
LPS22HH
Sensor_Pressure
MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, I3C, 0.65 Pa noise rms, ST_HLGA-10L
- Pins
- 10
- Pads
- 10
- SMD
- 2.5×2.5
LPS25HB
Sensor_Pressure
MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.01 hPa noise rms, ST_HLGA-10L
- Pins
- 10
- Pads
- 10
- SMD
- 3.0×3.0
TPL5010
Timer
Timer, Nano Power, Watchdog, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
TPL5111
Timer
Timer, Nano Power, Active-High, 35 nA, 100 ms to 7200 s, VDD 1.8V to 5.5V, Iout max 1mA, SOT-23-6
- Pins
- 6
- Pads
- 6
- SMD
- 4.1×3.4
LPS22HB
Sensor_Pressure
MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.0075 hPa noise rms, ST_HLGA-10L
- Pins
- 10
- Pads
- 10
- SMD
- 2.5×2.5
WSEN-PADS_2511020213301
Sensor_Pressure
MEMS nano pressure sensor, 260-1260 hPa, absolute digital output baromeeter, 24 bit, SPI, I2C, 0.75 Pa noise rms, ST_HLGA-10L
- Pins
- 10
- Pads
- 10
- SMD
- 2.5×2.5
Arduino_Nano_v3.x
MCU_Module
Arduino Nano v3.x
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
WS2812B-2020
LED
RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA
- Pins
- 4
- Pads
- 4
- SMD
- 3.0×2.5
Arduino_Nano_Every
MCU_Module
Arduino Nano Every
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
Arduino_Nano_v2.x
MCU_Module
Arduino Nano v2.x
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
BQ25570
Battery_Management
Nano Power Boost Charger and Buck Converter for Energy Harvester Powered Applications, QFN-20
- Pins
- 21
- Pads
- 21
- SMD
- 4.8×4.8
Arduino_Nano_ESP32
MCU_Module
Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
JAE_SIM_Card_SF72S006
Connector
Nano-SIM Card (4FF) connector with Detect Switch
- Pins
- 9
- Pads
- 9
- SMD
- 12.0×15.2
SK6805
LED
RGB LED with integrated controller
- Pins
- 4
- Pads
- 4
- SMD
- 3.5×2.9
Arduino_Nano_RP2040_Connect
MCU_Module
Arduino Nano board based on the RP2040 microcontroller with a dual-core 133 MHz ARM Cortex-M0+ processor, 264 kB SRAM, and up to 16 MB flash memory. Operates at 3.3V, with 5V Micro USB input and 4-20V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, and PIO. Includes a 6-axis IMU, RGB LED, microphone, and cryptographic chip for secure communication.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
Jadak_Thingmagic_M6e-Nano
RF_Module
RFID UHF module, 1 antenna port, 27dBm, edge pin connections
- Pins
- 41
- Pads
- 41
- SMD
- 24.4×27.9