Components
375 matching
Each one is a symbol, its recommended footprint and its 3D package model, linked by KiCad's own references and cross-checked pin by pin.
AP2112K-3.3
Regulator_Linear
600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
Conn_ARM_SWD_TagConnect_TC2030-NL
Connector
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin, no legs
- Pins
- 6
- Pads
- 6
- Mount
- 7.0×4.0
Conn_ARM_SWD_TagConnect_TC2030
Connector
Tag-Connect ARM Cortex SWD JTAG connector, 6 pin
- Pins
- 6
- Pads
- 6
- Mount
- 8.0×8.5
Arduino_Nano_ESP32
MCU_Module
Arduino Nano board based on the ESP32-S3 with a dual-core 240 MHz processor, 384 kB ROM, 512 kB SRAM. Operates at 3.3V, with 5V USB-C® input and 6-21V VIN. Features Wi-Fi®, Bluetooth® LE, digital and analog pins, and supports SPI, I2C, UART, I2S, and CAN.
- Pins
- 30
- Pads
- 30
- THT
- 18.3×46.2
ICE40UP5K-SG48ITR
FPGA_Lattice
iCE40 UltraPlus FPGA, 5280 LUTs, 1.2V, 48-pin QFN
- Pins
- 49
- Pads
- 49
- SMD
- 8.3×8.3
MCP2542FDxMF
Interface_CAN_LIN
CAN-FD Transceiver, Wake-Up on CAN activity, 8Mbps, 5V supply, STBY pin, 3x3 DFN-8
- Pins
- 9
- Pads
- 9
- SMD
- 4.3×3.5
LTST-C235KGKRKT
LED
LED dual red/green, 4-pin, down-facing
- Pins
- 4
- Pads
- 4
- SMD
- 5.8×3.4
AP2127N3-1.2
Regulator_Linear
300mA low dropout linear regulator, shutdown pin, 2.5V-6V input voltage, 1.2V fixed positive output, SOT-23-3 package
- Pins
- 3
- Pads
- 3
- SMD
- 4.3×3.4
ME6211C33M5
Regulator_Linear
500mA low dropout linear regulator, shutdown pin, 6.5V max input voltage, 3.3V fixed positive output, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
NCP115AMX250TCG
Regulator_Linear
300mA Low-Dropout Linear Regulators, 2.5V output voltage, LDO with low noise and enable pin, XDFN-4
- Pins
- 5
- Pads
- 5
- SMD
- 1.7×1.5
TLV76733DRVx
Regulator_Linear
1A Precision Linear Voltage Regulator, with enable pin, Fixed Output 3.3V, WSON6
- Pins
- 7
- Pads
- 7
- SMD
- 2.7×2.5
INA225
Amplifier_Current
36-V, Bidirectional Current Sense Amplifier, With Four Pin-Selectable Gain Settings, VSSOP-8
- Pins
- 8
- Pads
- 8
- SMD
- 6.4×3.5
ADA4691-2ACBZ
Amplifier_Operational
Dual RRO Op Amp, 2.7V to 5V single supply / ±1.35V to ±2.5V dual supply, 3.6 MHz bandwidth, 1.1V/µs slew rate, 500µV offset, 1 shutdown pin, FBGA-9 (Analog Device WLCSP-9)
- Pins
- 9
- Pads
- 9
- SMD
- 3.2×3.2
ADA4691-2ACPZ
Amplifier_Operational
Dual RRO Op Amp, 2.7V to 5V single supply / ±1.35V to ±2.5V dual supply, 3.6 MHz bandwidth, 1.1V/µs slew rate, 500µV offset, 2 shutdown pins, UQFN-10 (Analog Device LFCSP-10)
- Pins
- 10
- Pads
- 10
- SMD
- 3.2×3.2
ADA4691-4ACPZ
Amplifier_Operational
Quad RRO Op Amp, 2.7V to 5V single supply / ±1.35V to ±2.5V dual supply, 3.6 MHz bandwidth, 1.1V/µs slew rate, 500µV offset, 2 shutdown pins, WQFN-16 (Analog Device LFCSP-16)
- Pins
- 17
- Pads
- 17
- SMD
- 4.3×4.3
TSV911RILT
Amplifier_Operational
Single rail-to-rail input/output 8 MHz operational amplifiers, reversed power pins, SOT-23-5
- Pins
- 5
- Pads
- 5
- SMD
- 4.1×3.4
PCM1864DBT
Audio
4-Channel, 192 kHz, 24-bit, Audio ADC, 103dB SNR, I2S / left/right-justified / TDM digital output formats, I2C / SPI control interface, 4 digital microphone support (DMIN2 pin), TSSOP-30
- Pins
- 30
- Pads
- 30
- SMD
- 7.7×8.3
SN76494AN
Audio
Digital Complex Sound Generator, 3 square wave channels, 1 noise channel, up to 500kHz clock input, audio input pin, DIP-16
- Pins
- 16
- Pads
- 16
- THT
- 9.7×20.8
NC3MAAH-0
Connector_Audio
AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.3×23.2
NC3MAAV-0
Connector_Audio
AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.3×28.6
NC3MAH-0
Connector_Audio
A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.3×23.2
NC3MAV-0
Connector_Audio
A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.3×27.8
NC3MBH-0
Connector_Audio
B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, horizontal PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.0×23.2
NC3MBV-0
Connector_Audio
B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, vertical PCB mount
- Pins
- 4
- Pads
- 4
- THT
- 26.0×27.5