Reference schematic
Doorman S3
AzonInc-Doorman-Doorman-schematic
Loading the viewer…
AzonInc-Doorman-Doorman-schematic
Take the project archive: a schematic is a root sheet plus every sub-sheet beside it, and the root alone opens with its hierarchy missing. The archive is zstd-compressed (tar.zst).
1Sheets
43Placed parts
34Net labels
KiCad 9File format
Bill of materials
43 distinct parts
42 resolve to something in the catalog — click through to the component.
| Ref | Value | Symbol | Qty |
|---|---|---|---|
| C1 | 100nF | Device:C_Small | |
| C10 | 100nF | Device:C_Small | |
| C11 | 100nF | Device:C_Small | |
| C12 | 100nF | Device:C_Small | |
| C2 | 10uF | Device:C_Small | |
| C3 | 470uF | Device:C_Small | |
| C4 | 10uF | Device:C_Small | |
| C5 | 100nF | Device:C_Small | |
| C6 | 22uF | Device:C_Small | |
| C7 | 22uF | Device:C_Small | |
| C8 | 100nF | Device:C_Small | |
| C9 | 100nF | Device:C_Small | |
| D1 | 1N5819WS | Diode:1N5819WS | |
| D2 | MB6S | Diode_Bridge:MB6S | |
| D3 | WS2812B | LED:WS2812B-2020 | |
| D4 | Red LED | Device:LED | |
| D5 | 1N5819WS | Diode:1N5819WS | |
| D6 | 1N5819WS | Diode:1N5819WS | |
| J1 | USB_C_Receptacle_USB2.0 | Connector:USB_C_Receptacle_USB2.0_16P | |
| J2 | Terminal | Connector:Screw_Terminal_01x09 | |
| J3 | 3V3 Test Pad | Connector:TestPoint | |
| J4 | TX Test Pad | Connector:TestPoint | |
| J5 | RX Test Pad | Connector:TestPoint | |
| J6 | BUS Test Pad | Connector:TestPoint | |
| J7 | BUS RX Test Pad | Connector:TestPoint | |
| JP1 | Bus power Jumper | Jumper:Jumper_2_Small_Open | |
| L1 | 3.9uH | Device:L | |
| Q1 | BC817 | Transistor_BJT:BC817 | |
| R1 | 10K | Device:R | |
| R10 | 62 | Device:R | |
| R2 | 1K | Device:R | |
| R3 | 5.1K | Device:R | |
| R4 | 5.1K | Device:R | |
| R5 | 10K | Device:R | |
| R6 | 1.6K | Device:R | |
| R7 | 470 | Device:R | |
| R8 | 10K | Device:R | |
| R9 | 150 | Device:R | |
| SW1 | Reset | Switch:SW_Push | |
| SW2 | Flash | Switch:SW_Push |
Show the other 3
| U1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | |
| U2 | AP63203WU | Regulator_Switching:AP63203WU | |
| U3 | GAQY252G3S | easyeda2kicad:GAQY211G2S |
Provenance
- Repository
- AzonInc/Doorman ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.