Reference layout
AZ5 BOARD2
Complubot-AZ5-board2-AZ5-layout
Loading the viewer…
Complubot-AZ5-board2-AZ5-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
148Placed parts
33Nets
2Copper layers
80 × 132.01 mmBoard size
yesRouted
KiCad 5File format
Bill of materials
37 distinct parts
21 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| C1 | C100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C2 | CP47uF | Capacitor_SMD:CP_Elec_6.3x5.3 | |
| C3 | C22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C4 | C22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| D1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| D2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| D5 | US2D | Diode_SMD:D_SMB_Handsoldering | |
| J1 | Puerto_Temperatura_1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | |
| J10 | Agujero2 | MountingHole:MountingHole_3.2mm_M3 | |
| J11 | Agujero3 | MountingHole:MountingHole_3.2mm_M3 | |
| J12 | Agujero4 | MountingHole:MountingHole_3.2mm_M3 | |
| J13 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J14 | VCC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J15 | XT30 | proyectoAjeno:XT30PW-F | |
| J2 | Puerto_Temperatura_2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | |
| J3 | I2C0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J4 | I2C1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J5 | Puerto Motores | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | |
| J6 | UART0 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J7 | Puerto_Encoders | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| J8 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | |
| J9 | Agujero1 | MountingHole:MountingHole_3.2mm_M3 | |
| R1 | R330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R10 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R11 | R1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R12 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R13 | R100K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R2 | R330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R4 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R6 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R7 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R9 | R10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| SW1 | SW_Push | huellas:Pulsador_5,2x5,2 | |
| SW2 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W6.73mm_P2.54mm_LowProfile_JPin | |
| U1 | ATtiny1634-SU | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | |
| U2 | L7805 | Package_TO_SOT_SMD:SOT-223 | |
| Y1 | Crystal 16MHz | Compluino_03:Crystal |
Provenance
- Repository
- Complubot/AZ5 ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.