Reference layout
MEP ESP32
DabblerDK-MEP-HW-SMD-MEP-HW-SMD-layout
Loading the viewer…
DabblerDK-MEP-HW-SMD-MEP-HW-SMD-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
24Placed parts
56Nets
2Copper layers
70 × 28 mmBoard size
yesRouted
KiCad 5File format
Bill of materials
23 distinct parts
11 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| C1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| C5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| D1 | 1N4007 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| J1 | Buck GND input | TestPoint:TestPoint_Pad_4.0x4.0mm | |
| J2 | Buck +24v input | TestPoint:TestPoint_Pad_4.0x4.0mm | |
| J3 | Buck GND output | TestPoint:TestPoint_Pad_4.0x4.0mm | |
| J4 | Buck +3v3 output (see note) | TestPoint:TestPoint_Pad_4.0x4.0mm | |
| J5 | Prog/debug | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | |
| J6 | NES Meter MEP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Horizontal | |
| J7 | Connector_PinHeader_1.27mm:PinHeader_2x02_P1.27mm_Vertical_SMD | ||
| R1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R3 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R4 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R5 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R6 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| R7 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | |
| REF** | MountingHole_3.2mm_M3_DIN965 | MountingHole:MountingHole_3.2mm_M3_DIN965 | |
| U1 | MAX3232 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | |
| U2 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 |
Provenance
- Repository
- DabblerDK/MEP-HW-SMD ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.