Reference layout
Raspberry Pi Hat For AstroArch
FireNWater-Raspberry-Pi-Hat-for-AstroArch-Raspberry-Pi-Hat-for-AstroArch-layout
Loading the viewer…
FireNWater-Raspberry-Pi-Hat-for-AstroArch-Raspberry-Pi-Hat-for-AstroArch-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
Bill of materials
39 distinct parts
21 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| C1 | 10uF | Capacitor_SMD:C_0805_2012Metric | |
| C11 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C12 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C13 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C14 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C15 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C16 | ~ | Anderson Power Pole:APP 45A Vertical Contact | |
| C2 | 22uF | Capacitor_SMD:C_0805_2012Metric | |
| C2-1 | 22uF | Capacitor_SMD:C_0805_2012Metric | |
| C2-2 | 22uF | Capacitor_SMD:C_0805_2012Metric | |
| C3 | 100nF | Capacitor_SMD:C_0805_2012Metric | |
| C4 | 100pF | Capacitor_SMD:C_0805_2012Metric | |
| C5 | 2.7nF | Capacitor_SMD:C_0805_2012Metric | |
| C6 | 33pF | Capacitor_SMD:C_0805_2012Metric | |
| Css1 | 10nF | Capacitor_SMD:C_0805_2012Metric | |
| F1 | Polyfuse - 6A | Fuse:Fuse_2920_7451Metric | |
| H1 | MountingHole_Pad | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| H2 | MountingHole_Pad | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| H3 | MountingHole_Pad | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| H4 | MountingHole_Pad | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| H5 | MountingHole_Pad | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | |
| J1 | Raspberry_Pi_2_3 | Raspberry Pi Hat Parts:Raspberry_Pi_40_Pin_Header_With_Lands | |
| J2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| J3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | |
| L1 | 3.6uH | Inductor_SMD:L_Cenker_CKCS8080 | |
| R1 | 115K | Resistor_SMD:R_0805_2012Metric | |
| R2 | 22.1K | Resistor_SMD:R_0805_2012Metric | |
| R3 | 560 Ohm | Resistor Array:RES_EXB2HV | |
| R5 | 15.8K | Resistor_SMD:R_0805_2012Metric | |
| REF** | MountingHole_2.75mm_Pad | Mounting_Holes:MountingHole_2.75mm_Pad | |
| REF** | Zip_Tie_Hole_1.5mm_2mm_Pad | Mounting_Holes:Zip_Tie_Hole_1.5mm_2mm_Pad | |
| REF** | Camera_Cable_Hole_2mm_16mm_Pad | Mounting_Holes:Camera_Cable_Hole_2mm_16mm_Pad | |
| U1 | AP64501SP-13 | AP64501QSP_13:SO-8EP_DIO | |
| U2 | TLP3553ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS | |
| U3 | TLP3553ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS | |
| U4 | TLP3553ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS | |
| U5 | TLP3553ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS | |
| U6 | TLP241ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS | |
| U7 | TLP241ATP1_F | 4A Solid State Relay:SOIC_3553ATP1_F_TOS |
Provenance
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.