Reference layout
Cryo Plunger LED Array
Llamero-Cryo_Plunger_LED_Array-Cryo_Plunger_LED_Array-layout
Loading the viewer…
Llamero-Cryo_Plunger_LED_Array-Cryo_Plunger_LED_Array-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
40Placed parts
43Nets
2Copper layers
100 × 98 mmBoard size
yesRouted
KiCad 8File format
Bill of materials
39 distinct parts
19 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| C1 | 2.2µF | Capacitor_SMD:C_0603_1608Metric | |
| C2 | 1nF | Capacitor_SMD:C_0603_1608Metric | |
| C3 | 1nF | Capacitor_SMD:C_0603_1608Metric | |
| C4 | 3mF | Custom footprints:ALF20G302KP400 | |
| C5 | 1nF | Capacitor_SMD:C_0603_1608Metric | |
| C6 | 1nF | Capacitor_SMD:C_0603_1608Metric | |
| D1 | D | Custom footprints:P26_DO-214AA_SMB | |
| D2 | 15V Zener | Diode_SMD:D_SOD-123 | |
| D3 | TVS | Custom footprints:SMDJSeries_LTF | |
| F1 | Fuse | Custom footprints:FUSE_OMF250_SCH | |
| F2 | Fuse | Custom footprints:FUSE_OMF250_SCH | |
| F3 | Fuse | Custom footprints:FUSE_OMF250_SCH | |
| H1 | Standoff | Custom footprints:8-32 Isolated Hole | |
| H2 | Standoff | Custom footprints:8-32 Standoff | |
| H3 | Standoff | Custom footprints:8-32 Isolated Hole | |
| J2 | 3x Banana Jack | Custom footprints:SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm - HV Slot | |
| J3 | Conn_Coaxial | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | |
| J4 | 8P8C_Shielded | Custom footprints:BEL_SS71800-019F - HV Slot | |
| J5 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | |
| LA1 | E12 Socket | Custom footprints:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm - HV Slot | |
| LS1 | Speaker_Crystal | Custom footprints:XDCR_SMT-0940-T-3V-R | |
| Q1 | PMOS | Custom footprints:TO-252-2 - HV | |
| Q2 | TN2124 | Custom footprints:SOT-23-3 - HV Slot | |
| R1 | 1M | Custom footprints:R_1206_3216 - HV slot | |
| R10 | 180 | Resistor_SMD:R_0805_2012Metric | |
| R2 | 100k | Resistor_SMD:R_1206_3216Metric | |
| R3 | 20k | Resistor_SMD:R_0603_1608Metric | |
| R4 | 100k | Custom footprints:R_1206_3216 - HV slot | |
| R5 | 1 | Package_TO_SOT_THT:TO-126-2_Vertical | |
| R6 | 10 | Package_TO_SOT_THT:TO-247-2_Vertical | |
| R7 | 10 | Package_TO_SOT_THT:TO-247-2_Vertical | |
| R8 | 10 | Package_TO_SOT_THT:TO-247-2_Vertical | |
| R9 | 20k | Resistor_SMD:R_0603_1608Metric | |
| SW1 | SW_Push_LED | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm | |
| SYM1 | SYM_Flash_Small | Custom footprints:Symbol_HighVoltage | |
| SYM2 | SYM_Flash_Small | Symbol:Symbol_Highvoltage_Type2_CopperTop_Small | |
| SYM3 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | |
| U1 | Itsy_Bitsy_32u4 | Custom footprints:Itsy Bitsy 32u4 | |
| U2 | 4.096V | Package_TO_SOT_SMD:SOT-23-6 |
Provenance
- Repository
- Llamero/Cryo_Plunger_LED_Array ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.