Reference layout
Scum Dev Board BOARD10
PisterLab-scum-dev-board-board10-scum-dev-board-layout
This board is saved in the KiCad 5 format (version 20171130), which the in-browser viewer cannot read, and KiCad's own converter could not produce a copy it can. Download the project below: current KiCad opens it and upgrades it.
PisterLab-scum-dev-board-board10-scum-dev-board-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
Bill of materials
87 distinct parts
43 resolve to something in the catalog — click through to the footprint.
Show the other 47
| J11 | through_hole | SCUM:through_hole | |
| J12 | through_hole | SCUM:through_hole | |
| J13 | 0.1uF | SCUM:through_hole | |
| J13 | through_hole | SCUM:through_hole | |
| J14 | through_hole | SCUM:through_hole | |
| J15 | through_hole | SCUM:through_hole | |
| J16 | BH1000G | SCUM:through_hole | |
| J16 | through_hole | SCUM:through_hole | |
| J17 | 10 uF | SCUM:through_hole | |
| J17 | through_hole | SCUM:through_hole | |
| J18 | R_Small_US | SCUM:through_hole | |
| J18 | through_hole | SCUM:through_hole | |
| J19 | through_hole | SCUM:through_hole | |
| J2 | S-85S1AB18-I6T1U | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | |
| J2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | |
| J20 | Conn_02x11_Odd_Even | SCUM:through_hole | |
| J20 | NP | SCUM:through_hole | |
| J21 | through_hole | SCUM:through_hole | |
| J3 | through_hole | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | |
| J3 | — | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | |
| J3 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | |
| J4 | 73391-0060 | downloaded_libs:MOLEX_73391-0060 | |
| J4 | — | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | |
| J5 | LP5907MFX-1.8 | SCUM:through_hole | |
| J5 | — | SCUM:through_hole | |
| J6 | through_hole | SCUM:through_hole | |
| J6 | NP | SCUM:through_hole | |
| J7 | through_hole | SCUM:through_hole | |
| J8 | through_hole | SCUM:through_hole | |
| J8 | — | SCUM:through_hole | |
| J9 | 100 uF | SCUM:through_hole | |
| J9 | 10 uF | SCUM:through_hole | |
| L1 | 2.2 uH | Capacitor_SMD:C_0402_1005Metric | |
| L1 | 2.2 uH | Inductor_SMD:L_0402_1005Metric | |
| L2 | 2.2 uH | Inductor_SMD:L_0402_1005Metric | |
| R1 | NP | Resistor_SMD:R_0402_1005Metric | |
| R2 | R_Small_US | Resistor_SMD:R_0402_1005Metric | |
| R2 | R_Small_US | Capacitor_SMD:C_0402_1005Metric | |
| R3 | R_Small_US | Resistor_SMD:R_0402_1005Metric | |
| R4 | 0 Ohm | Resistor_SMD:R_0402_1005Metric | |
| U1 | scum3 | SCUM:QFN-100_EP_12x12_Pitch0.4mm_Margin0.25mm | |
| U2 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | |
| U2 | S-85S1AB18-I6T1U | downloaded_libs:SOFL50P180X50-6N | |
| U3 | TLV70311DBVR | downloaded_libs:SOT95P280X145-5N | |
| U3 | S-85S1AB11-I6T1U | downloaded_libs:SOFL50P180X50-6N | |
| U9AB1 | NP | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | |
| U9AB1 | — | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm |
Provenance
- Repository
- PisterLab/scum-dev-board ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.
