Reference schematic
Raspberry Pi Pico Clone
RetroScaler-RP2040-PICO-BOOT-RP2040-PICO-BOOT-schematic
Loading the viewer…
RetroScaler-RP2040-PICO-BOOT-RP2040-PICO-BOOT-schematic
Take the project archive: a schematic is a root sheet plus every sub-sheet beside it, and the root alone opens with its hierarchy missing. The archive is zstd-compressed (tar.zst).
Bill of materials
57 distinct parts
53 resolve to something in the catalog — click through to the component.
| Ref | Value | Symbol | Qty |
|---|---|---|---|
| C1 | 10uf 0603 | Device:C | |
| C10 | 1uf 0402 | Device:C | |
| C101 | 0.1uf 0402 | Device:C | |
| C11 | 100nf 0402 | Device:C | |
| C12 | 100nf 0402 | Device:C | |
| C13 | 100nf 0402 | Device:C | |
| C14 | 100nf 0402 | Device:C | |
| C15 | 100nf 0402 | Device:C | |
| C16 | 100nf 0402 | Device:C | |
| C17 | 10uf 0402 | Device:C | |
| C18 | 100nf 0402 | Device:C | |
| C19 | 22pf 0402 | Device:C | |
| C2 | 22pf 0402 | Device:C | |
| C3 | 1uf 0402 | Device:C | |
| C4 | 22pF | Device:C | |
| C5 | 100nf 0402 | Device:C | |
| C6 | 100nf 0402 | Device:C | |
| C7 | 100nf 0402 | Device:C | |
| C8 | 100nf 0402 | Device:C | |
| C9 | 10uf 0603 | Device:C | |
| D1 | 1N4002W | Device:D_Schottky | |
| F1 | 0805L050WR | Device:Polyfuse_Small | |
| FLASH1 | W25Q16JVUXIQ | W25Q256JVEIQ_TR:W25Q256JVEIQ_TR | |
| GPIO25_LED1 | LED_0402 | Device:LED | |
| GPIO25_RESISTOR1 | 470 0402 | Device:R | |
| H1 | MountingHole | Mechanical:MountingHole | |
| H2 | MountingHole | Mechanical:MountingHole | |
| H3 | MountingHole | Mechanical:MountingHole | |
| H4 | MountingHole | Mechanical:MountingHole | |
| J2 | TSA343G00-250J2 | Switch:SW_Push | |
| J3 | 2.54mm header 01x20 | Connector_Generic:Conn_01x20 | |
| J4 | 2.54mm header 01x20 | Connector_Generic:Conn_01x20 | |
| J5 | Conn_01x03_Male | Connector_Generic:Conn_01x03 | |
| L1 | 2.2uH | Device:L_Small | |
| NT1 | NetTie_2 | Device:NetTie_2 | |
| R1 | 1K 0402 | Device:R | |
| R10 | 1 0402 | Device:R_Small | |
| R101 | 5.6K 0402 | Device:R | |
| R102 | 220 0402 | Device:R | |
| R103 | 10K 0402 | Device:R |
Show the other 17
| R11 | 1K 0402 | Device:R | |
| R12 | 150K | Device:R | |
| R2 | 10K 0402 | Device:R | |
| R3 | 27r 0402 resistor | Device:R | |
| R4 | 27r 0402 resistor | Device:R | |
| R5 | 5.1K 0402 | Device:R_Small | |
| R6 | 5.1K 0402 | Device:R_Small | |
| R7 | 100K 0402 | Device:R | |
| R8 | 680K | Device:R | |
| R9 | 200 0603 | Device:R_Small | |
| RSW1 | TSA343G00-250J2 | Switch:SW_Push | |
| TP1 | TestPoint | Connector:TestPoint | |
| TP2 | TestPoint | Connector:TestPoint | |
| U1 | TD6810-ADJ | Custom_components:TD6810-ADJ | |
| U3 | RP2040 | MCU_RaspberryPi_RP2040:RP2040 | |
| USB1 | TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12 | |
| Y1 | 3225_4P | Device:Crystal_GND24 |
Provenance
- Repository
- RetroScaler/RP2040-PICO-BOOT ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.
