Reference layout
FabricFox FPGASIC
TinyTapeout-breakout-pcb-board3-breakout-pcb-layout
Loading the viewer…
TinyTapeout-breakout-pcb-board3-breakout-pcb-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
120Placed parts
73Nets
4Copper layers
50 × 53 mmBoard size
yesRouted
KiCad 9File format
Bill of materials
70 distinct parts
46 resolve to something in the catalog — click through to the footprint.
Show the other 30
| R7 | 68 | Resistor_SMD:R_0402_1005Metric | |
| R8 | 68 | Resistor_SMD:R_0402_1005Metric | |
| R9 | 100 | Resistor_SMD:R_0402_1005Metric | |
| STITCH01 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH10 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH11 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH12 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH13 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH14 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH15 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH2 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH3 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH4 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH5 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH6 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH7 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH8 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| STITCH9 | StitchingVia-0.4mmDrill | flyingcarsfootprints:StitchingVia-0.4mmDrill | |
| TP1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | |
| TP2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | |
| TP3 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | |
| TP4 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | |
| TP5 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | |
| TP6 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | |
| TP7 | TestPoint_Flag | TestPoint:TestPoint_Keystone_5019_Miniature | |
| TTLOGO1 | TT_logo | Logos:TT_logo | |
| U1 | ICE40UP5K-SG48I | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | |
| U2 | AP2112K-1.2 | Package_TO_SOT_SMD:SOT-23-5 | |
| X1 | 24MHz | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | |
| {$REFERENCE} | PSYLOGO | flyingcarsfootprints:PsychoLogoSmall |
Provenance
- Repository
- TinyTapeout/breakout-pcb ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.