Reference layout
SailingStartTimer
brianz123-sailingStartTimer-sailingStartTimer-layout
Loading the viewer…
brianz123-sailingStartTimer-sailingStartTimer-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
32Placed parts
34Nets
2Copper layers
100 × 60 mmBoard size
yesRouted
KiCad 7File format
Bill of materials
32 distinct parts
12 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| 3.3V | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A0 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A1 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A1 | Arduino Nano | Module:Arduino_Nano | |
| A2 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A3 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A4 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A5 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A6 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| A7 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D1 | Status | LED_THT:LED_D3.0mm | |
| D10 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D11 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D12 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D13 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D2 | Power | LED_THT:LED_D3.0mm | |
| D8 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| D9 | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| GND | MountingHole_1.2mm | Arduino_MountingHole:MountingHole_1.2mm | |
| LS1 | Speaker | Connector_Wire:SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm | |
| R1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| R2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| R3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| R4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| R5 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| R6 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | |
| Relay | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | |
| SW1 | Reset | Button_Switch_THT:SW_PUSH-12mm | |
| SW2 | 2 Min | Button_Switch_THT:SW_PUSH-12mm | |
| SW3 | 3 Min | Button_Switch_THT:SW_PUSH-12mm | |
| SW4 | Horn | Button_Switch_THT:SW_PUSH-12mm | |
| V1 | Battery | Connector_Wago:Wago_734-132_1x02_P3.50mm_Vertical |
Provenance
- Repository
- brianz123/sailingStartTimer ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.