Reference layout
Pillbus
johannesloetzsch-pillbus-pillbus-layout
Loading the viewer…
johannesloetzsch-pillbus-pillbus-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
1,179Placed parts
40Nets
2Copper layers
99.06 × 99.06 mmBoard size
yesRouted
KiCad 8File format
Bill of materials
56 distinct parts
None of these names match a library the catalog carries.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| — | — | — | |
| Gnd1 | ~ | base:PTH 1.7mm | |
| Gnd10 | ~ | base:PTH 1.7mm | |
| Gnd11 | ~ | base:PTH 1.7mm | |
| Gnd12 | ~ | base:PTH 1.7mm | |
| Gnd13 | ~ | base:PTH 1.7mm | |
| Gnd14 | ~ | base:PTH 1.7mm | |
| Gnd15 | ~ | base:PTH 1.7mm | |
| Gnd16 | ~ | base:PTH 1.7mm | |
| Gnd17 | ~ | base:PTH 1.7mm | |
| Gnd18 | ~ | base:PTH 1.7mm | |
| Gnd19 | ~ | base:PTH 1.7mm | |
| Gnd2 | ~ | base:PTH 1.7mm | |
| Gnd20 | ~ | base:PTH 1.7mm | |
| Gnd21 | ~ | base:PTH 1.7mm | |
| Gnd22 | ~ | base:PTH 1.7mm | |
| Gnd23 | ~ | base:PTH 1.7mm | |
| Gnd24 | ~ | base:PTH 1.7mm | |
| Gnd25 | ~ | base:PTH 1.7mm | |
| Gnd26 | ~ | base:PTH 1.7mm | |
| Gnd27 | ~ | base:PTH 1.7mm | |
| Gnd28 | ~ | base:PTH 1.7mm | |
| Gnd29 | ~ | base:PTH 1.7mm | |
| Gnd3 | ~ | base:PTH 1.7mm | |
| Gnd30 | ~ | base:PTH 1.7mm | |
| Gnd31 | ~ | base:PTH 1.7mm | |
| Gnd32 | ~ | base:PTH 1.7mm | |
| Gnd33 | ~ | base:PTH 1.7mm | |
| Gnd34 | ~ | base:PTH 1.7mm | |
| Gnd35 | ~ | base:PTH 1.7mm | |
| Gnd36 | ~ | base:PTH 1.7mm | |
| Gnd37 | ~ | base:PTH 1.7mm | |
| Gnd38 | ~ | base:PTH 1.7mm | |
| Gnd4 | ~ | base:PTH 1.7mm | |
| Gnd5 | ~ | base:PTH 1.7mm | |
| Gnd6 | ~ | base:PTH 1.7mm | |
| Gnd7 | ~ | base:PTH 1.7mm | |
| Gnd8 | ~ | base:PTH 1.7mm | |
| Gnd9 | ~ | base:PTH 1.7mm | |
| J1 | IDE STM bus | ribbon:IDE STM bus |
Show the other 16
| J11 | IDE STM bus | ribbon:IDE STM bus | |
| J12 | IDE STM bus | ribbon:IDE STM bus | |
| J13 | IDE STM bus | ribbon:IDE STM bus | |
| J14 | IDE STM bus | ribbon:IDE STM bus | |
| J15 | IDE STM bus | ribbon:IDE STM bus | |
| J16 | IDE STM bus | ribbon:IDE STM bus | |
| J17 | IDE STM bus | ribbon:IDE STM bus | |
| J2 | IDE STM bus | ribbon:IDE STM bus | |
| J3 | IDE STM bus | ribbon:IDE STM bus | |
| J4 | IDE STM bus | ribbon:IDE STM bus | |
| J5 | IDE STM bus | ribbon:IDE STM bus | |
| J6 | IDE STM bus | ribbon:IDE STM bus | |
| J7 | IDE STM bus | ribbon:IDE STM bus | |
| REF** | PTH | base:PTH 1.7mm | |
| REF** | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm cu-only | base:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm cu-only | |
| U*** | QFN-32 | base:Breakout QFN-32 |
Provenance
- Repository
- johannesloetzsch/pillbus ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.