DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
Connector_Dsub
9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, pins (male), pitch 2.77x2.84mm, pin-PCB-offset 7.7mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf
Footprint
10 pads
- Mount
- Through hole
- Courtyard
- 31.86 × 19.75 mm
- Pads
- 10
- File
- 5 KB
3D model
STEPConnector_Dsub_DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm
30.80 × 18.44 × 17.90 mm
176 KB STEP
- Library
- Connector_Dsub_DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed
- Model page
- Open →
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| E800J BOARD2 | 95 | 76 | 2 | 307.97 × 53.09 mm | CC-BY-4.0 | codepainters/e800j ↗ |
| ESP32 Motor RS232 | 59 | 66 | 2 | 63.75 × 52.7 mm | CC-BY-4.0 | Henriquepr15/ESP32-Motor-RS232 ↗ |
| Tuos Rp2c02 Isa | 49 | 135 | 2 | 99.57 × 99.69 mm | CC-BY-4.0 | taka-tuos/rp2c02-isa ↗ |
| Canfdshield | 18 | 43 | 4 | 53.93 × 53.34 mm | CC-BY-4.0 | feaser/canfdshield ↗ |
| Rotary Encoder Protection | 18 | 9 | 2 | 38.5 × 29.75 mm | CC-BY-4.0 | TheTesla/rotary-encoder-protection ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception