Footprint
10 pads
- Mount
- Through hole
- Courtyard
- 12.31 × 26.4 mm
- Pads
- 10
- File
- 17 KB
3D model
STEPConnector_PinHeader_2.54mm_PinHeader_1x10_P2.54mm_Horizontal
10.36 × 25.40 × 5.54 mm
403 KB STEP
- Library
- Connector_PinHeader_2.54mm_PinHeader_1x10_P2.54mm
- Model page
- Open →
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| LibreVNA Kicad PCB | 592 | 439 | 6 | 122 × 98 mm | CC-BY-4.0 | sophiekovalevsky/LibreVNA ↗ |
| 8BitProcessor BOARD3 | 246 | 66 | 2 | 224.31 × 447.34 mm | CC-BY-4.0 | Tonikiller10000/8BitProcessor ↗ |
| Machinehum Flipper Blackhat | 184 | 322 | 4 | 91 × 53.08 mm | CC-BY-4.0 | o7-machinehum/flipper-blackhat ↗ |
| Multiribbon BOARD2 | 135 | 80 | 2 | 310 × 60 mm | CC-BY-4.0 | g200kg/multiribbon ↗ |
| Модуль подключения MIDI плат.\n100мм вариант\nПлата печатная | 127 | 110 | 2 | 100 × 100 mm | CC-BY-4.0 | Dethernal/Midibox3 ↗ |
| Модуль подключения MIDI плат.\n100мм вариант\nПлата печатная | 114 | 76 | 2 | 100 × 100 mm | CC-BY-4.0 | Dethernal/Midibox3 ↗ |
| CanSat | 89 | 114 | 4 | 113.1 × 105.59 mm | CC-BY-4.0 | NBER08/CanSat ↗ |
| ents-node | 72 | 79 | 2 | 139 × 45 mm | CC-BY-4.0 | jlab-sensing/ENTS-node-hardware ↗ |
| EL-Load-Reverse-Polarity | 63 | 33 | 2 | 49 × 49 mm | CC-BY-4.0 | fietser28/EL-Load ↗ |
| REG1 BOARD4 | 60 | 66 | 2 | 83 × 32.8 mm | CC-BY-4.0 | OpenKNX/OpenKNX-REG1 ↗ |
| Stack Machine BOARD7 | 56 | 71 | 2 | 126.5 × 84 mm | CC-BY-4.0 | HDrizzle/stack_machine ↗ |
| Ym Motor Driver | 55 | 33 | 2 | 140 × 40 mm | CC-BY-4.0 | daisuke-ym/motor-driver ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception