SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm
Connector_Wire
Soldered wire connection, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
3 pads
- Mount
- Through hole
- Courtyard
- 9.8 × 2.6 mm
- Pads
- 3
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Kicad BOARD12 | 105 | 52 | 2 | 239.92 × 125.71 mm | CC-BY-4.0 | PappasFlow/kicad ↗ |
| Kicads BOARD3 | 48 | 59 | 2 | 40 × 30 mm | CC-BY-4.0 | kelvie/kicads ↗ |
| Morphing wing PCB | 32 | 38 | 2 | 54.5 × 77.5 mm | CC-BY-4.0 | mvx-dev/morphing-airfoil ↗ |
| WemosMosfet | 26 | 27 | 2 | 35.56 × 27.04 mm | CC-BY-4.0 | TheBlueManCoding/WemosMosfet ↗ |
| Kicad BOARD18 | 18 | 19 | 2 | 37.08 × 45.47 mm | CC-BY-4.0 | PappasFlow/kicad ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception