SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
3 pads
- Mount
- Through hole
- Courtyard
- 9.8 × 8.55 mm
- Pads
- 3
- File
- 5 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Kanaev Kicads BOARD3 | 61 | 46 | 2 | 130.18 × 112.39 mm | CC-BY-4.0 | s-kanaev/kicads ↗ |
| CheesyController | 29 | 49 | 2 | 75 × 25 mm | CC-BY-4.0 | hlord2000/CheesyController ↗ |
| 80ColumnCard BOARD2 | 17 | 30 | 2 | 30.48 × 48.26 mm | CC-BY-4.0 | btb/80ColumnCard ↗ |
| 1892 Eten En Drinken Trapverlichting PCB Design | 12 | 17 | 2 | 57 × 51.5 mm | CC-BY-4.0 | TraccySolutions/1892-Eten-en-Drinken-Trapverlichting-PCB-design ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception