SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.10 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
4 pads
- Mount
- Through hole
- Courtyard
- 13.4 × 8.55 mm
- Pads
- 4
- File
- 6 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Tire Temperature Sensor | 57 | 79 | 4 | 27 × 54 mm | CC-BY-4.0 | KozaMateusz/tire_temperature_sensor ↗ |
| Motorsport PUTM EV TIRE TEMP SENSOR | 57 | 79 | 4 | 27 × 54 mm | CC-BY-4.0 | PUT-Motorsport/PUTM_EV_TIRE_TEMP_SENSOR ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception