SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
2 pads
- Mount
- Through hole
- Courtyard
- 7.4 × 13.22 mm
- Pads
- 2
- File
- 4 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Multiribbon | 65 | 71 | 2 | 107 × 80 mm | CC-BY-4.0 | g200kg/multiribbon ↗ |
| Project Tamiya BOARD2 | 45 | 53 | 2 | 106.2 × 40 mm | CC-BY-4.0 | lunakiller/project_tamiya ↗ |
| 1892 Eten En Drinken Trapverlichting PCB Design BOARD3 | 38 | 46 | 2 | 100 × 64 mm | CC-BY-4.0 | TraccySolutions/1892-Eten-en-Drinken-Trapverlichting-PCB-design ↗ |
| moca-hcho | 24 | 46 | 2 | 66 × 57 mm | CC-BY-4.0 | Gekkio/moca-hcho ↗ |
| 1892 Eten En Drinken Trapverlichting PCB Design BOARD2 | 14 | 37 | 2 | 67 × 55 mm | CC-BY-4.0 | TraccySolutions/1892-Eten-en-Drinken-Trapverlichting-PCB-design ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception