SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm
Connector_Wire
Soldered wire connection, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
3 pads
- Mount
- Through hole
- Courtyard
- 11.6 × 2.84 mm
- Pads
- 3
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Spectrum Analyzer BOARD13 | 57 | 34 | 2 | 85.34 × 76.45 mm | CC-BY-4.0 | dmsmccann/Spectrum-Analyzer ↗ |
| Project Tamiya BOARD2 | 45 | 53 | 2 | 106.2 × 40 mm | CC-BY-4.0 | lunakiller/project_tamiya ↗ |
| Clarinoid BOARD2 | 41 | 70 | 2 | 60 × 62 mm | CC-BY-4.0 | thenfour/Clarinoid ↗ |
| CursoIoT | 11 | 33 | 2 | 43.97 × 88.25 mm | CC-BY-4.0 | Epivaral/CursoIoT ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception