SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 3.6 × 15.98 mm
- Pads
- 1
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Millihom Meter | 24 | 10 | 2 | 61.59 × 48.89 mm | CC-BY-4.0 | Pronoe/millihom-meter ↗ |
| Boes BOARD2 | 9 | 8 | 2 | 38.1 × 26.04 mm | CC-BY-4.0 | AntarktisZ11/boes ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception