SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm
Connector_Wire
Soldered wire connection, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
2 pads
- Mount
- Through hole
- Courtyard
- 8.2 × 3.16 mm
- Pads
- 2
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| CH32X-75 | 325 | 209 | 2 | 285 × 94.2 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| PyKey40 | 244 | 161 | 2 | 227 × 77 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| Hoerbaer | 233 | 186 | 4 | 76 × 88 mm | CC-BY-4.0 | drachosaurus/hoerbaer ↗ |
| PyKey40 Lite | 136 | 107 | 2 | 227 × 77 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| Just Split | 128 | 89 | 2 | 128.2 × 112.1 mm | CC-BY-4.0 | semicontinuity/embedded ↗ |
| CH32X-48 | 117 | 75 | 2 | 224.55 × 74.15 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| CH552-48 | 112 | 74 | 2 | 224.55 × 74.15 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| CH552-48LPR | 112 | 74 | 2 | 224.55 × 73.15 mm | CC-BY-4.0 | rgoulter/keyboard-labs ↗ |
| ESP32-S3 3D printer controller | 97 | 96 | 4 | 102 × 102 mm | CC-BY-4.0 | Angelo13C/3d-printer ↗ |
| IoT LED Driver HW | 85 | 74 | 4 | 57 × 56 mm | CC-BY-4.0 | 0xjmux/iot_leddriver_hw ↗ |
| 12V 5V 9V Power Supply System | 81 | 38 | 2 | 98 × 87.5 mm | CC-BY-4.0 | mfrisch3/AUV_PCB ↗ |
| Spectrum Analyzer: IF and Log Amp | 75 | 42 | 2 | 91.69 × 48.77 mm | CC-BY-4.0 | dmsmccann/Spectrum-Analyzer ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception