SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 3.8 × 17.5 mm
- Pads
- 1
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| SHVRIMPS BOARD3 | 25 | 15 | 2 | 99.98 × 56.63 mm | CC-BY-4.0 | nhatminh2h/SHVRIMPS ↗ |
| SHVRIMPS BOARD4 | 20 | 17 | 2 | 100.33 × 42.28 mm | CC-BY-4.0 | nhatminh2h/SHVRIMPS ↗ |
| Ethernet To Spi BOARD4 | 17 | 17 | 2 | 64 × 28 mm | CC-BY-4.0 | imihajlow/ethernet-to-spi ↗ |
| MiniRysElectronics | 13 | 6 | 2 | 90 × 40 mm | CC-BY-4.0 | GroupOfRobots/MiniRysElectronics ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception