SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm
Connector_Wire
Soldered wire connection, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter
Footprint
2 pads
- Mount
- Through hole
- Courtyard
- 13.2 × 4.9 mm
- Pads
- 2
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| General Nano | 57 | 164 | 2 | 100 × 100 mm | CC-BY-4.0 | MrSimranjitSingh/General_Nano ↗ |
| PSU Linear Reg | 26 | 13 | 2 | 100 × 40 mm | CC-BY-4.0 | matterwaves/PSU_linear_reg ↗ |
| Sun Bulb | 19 | 9 | 2 | 46 × 33 mm | CC-BY-4.0 | solich919/Sun_bulb ↗ |
| 1892 Eten En Drinken Trapverlichting PCB Design | 12 | 17 | 2 | 57 × 51.5 mm | CC-BY-4.0 | TraccySolutions/1892-Eten-en-Drinken-Trapverlichting-PCB-design ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception