Fuseholder_Blade_ATO_Littelfuse_Pudenz_2_Pin
Fuse
Fuseholder ATO Blade littelfuse Pudenz 2 Pin
Footprint
2 pads
- Mount
- Through hole
- Courtyard
- 20.5 × 6.5 mm
- Pads
- 2
- File
- 4 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| WomoLIN | 534 | 627 | 4 | 254.89 × 150.11 mm | CC-BY-4.0 | muccc/WomoLIN ↗ |
| 3D Printer Board - FHNW EIT FS19 T8 | 264 | 308 | 4 | 158 × 95 mm | CC-BY-4.0 | koson/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32 ↗ |
| Vandal | 227 | 157 | 2 | 147 × 92 mm | CC-BY-4.0 | blinken/vandal ↗ |
| Esp32PrinterController | 101 | 114 | 2 | 157.48 × 97.79 mm | CC-BY-4.0 | MitchBradley/Esp32PrinterController ↗ |
| Raptor Dragon Controller BOARD2 | 88 | 103 | 2 | 100 × 95 mm | CC-BY-4.0 | Doc-Raptor/dragon_controller ↗ |
| Raptor Dragon Controller | 88 | 103 | 2 | 100 × 95 mm | CC-BY-4.0 | Doc-Raptor/dragon_controller ↗ |
| WLED32Hub | 76 | 75 | 2 | 112.38 × 137.19 mm | CC-BY-4.0 | kayneyao/WLED32Hub ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception