MountingHole_2.1mm
MountingHole
Mounting Hole 2.1mm, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 4.7 × 4.7 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| GlassUnicorn BOARD2 | 1,127 | 187 | 4 | 61 × 76 mm | CC-BY-4.0 | gregdavill/GlassUnicorn ↗ |
| 1KCubeSat Hardware BOARD2 | 657 | 356 | 4 | 85 × 85 mm | CC-BY-4.0 | rgw3d/1KCubeSat_Hardware ↗ |
| GlassUnicorn BOARD3 | 635 | 170 | 4 | 61 × 61 mm | CC-BY-4.0 | gregdavill/GlassUnicorn ↗ |
| PC-1100X-04 | 528 | 290 | 4 | 129 × 104.6 mm | CC-BY-4.0 | zscircuits/zs1100a ↗ |
| Pipar Point | 466 | 328 | 2 | 245.75 × 172.65 mm | CC-BY-4.0 | RasmusKoit/pipar ↗ |
| Ottosdiy | 410 | 17 | 2 | 140 × 120 mm | CC-BY-4.0 | intechstudio/ottosdiy ↗ |
| Hog | 370 | 217 | 2 | 215 × 100 mm | CC-BY-4.0 | shmoergh/hog ↗ |
| Hog BOARD2 | 361 | 204 | 2 | 215 × 100 mm | CC-BY-4.0 | shmoergh/hog ↗ |
| OpenEFI | 345 | 368 | 4 | 164 × 118 mm | CC-BY-4.0 | Churrosoft/OpenEFI-PCB ↗ |
| OpenEFI | 345 | 368 | 4 | 164 × 118 mm | CC-BY-4.0 | Churrosoft/OpenEFI-PCB ↗ |
| FOSSerZero | 331 | 203 | 4 | 95.43 × 36.15 mm | CC-BY-4.0 | E440QF/FOSSerZero ↗ |
| OzzyBoard | 280 | 251 | 4 | 100 × 100 mm | CC-BY-4.0 | vbalsan/OzzyBoard ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception