MountingHole_2.5mm_Pad
MountingHole
Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.5 × 5.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| HPPSI02 | 561 | 462 | 4 | 203 × 100 mm | CC-BY-4.0 | emoninet2/HPPSI02 ↗ |
| Rf Switchboard | 467 | 456 | 4 | 100 × 174.57 mm | CC-BY-4.0 | Erhannis/rf_switchboard ↗ |
| APT-XAV-PX4 | 438 | 702 | 8 | 100.23 × 120 mm | CC-BY-4.0 | ApotheoTech/APT-XAV-PX4 ↗ |
| Aithra IO Shield Ver 1.0 | 309 | 333 | 6 | 100.23 × 63.51 mm | CC-BY-4.0 | ApotheoTech/APT-XAV-PX4 ↗ |
| Lancer mainboard | 257 | 431 | 2 | 167.4 × 104.78 mm | CC-BY-4.0 | Szendvics/Lancer ↗ |
| Lab Scales Hardware BOARD12 | 256 | 158 | 4 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| Lab Scales Hardware BOARD11 | 253 | 175 | 4 | 95.15 × 66 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| XBT Autolauncher 3.0 | 247 | 312 | 2 | 310 × 100 mm | CC-BY-4.0 | cxs1529/XBT_Autolauncher_PCB ↗ |
| XBT Autolauncher 3.0 | 247 | 312 | 2 | 310 × 100 mm | CC-BY-4.0 | cxs1529/XBT_Autolauncher_PCB ↗ |
| XBT Autolauncher 3.0 | 236 | 303 | 2 | 310 × 100 mm | CC-BY-4.0 | cxs1529/XBT_Autolauncher_PCB ↗ |
| XBT Autolauncher 3.0 | 235 | 302 | 2 | 310 × 100 mm | CC-BY-4.0 | cxs1529/XBT_Autolauncher_PCB ↗ |
| Kicad Dependencies | 232 | 274 | 4 | 494.28 × 200 mm | CC-BY-4.0 | Erhannis/kicad_dependencies ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception