MountingHole_2.5mm_Pad_TopBottom
MountingHole
Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.5 × 5.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Kicad BOARD2 | 878 | 853 | 6 | 150 × 160 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| Kicad BOARD5 | 854 | 860 | 6 | 150 × 160 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| Kicad BOARD4 | 386 | 245 | 6 | 150 × 160 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| ADC7177M1 | 262 | 294 | 4 | 160 × 100 mm | CC-BY-4.0 | BehrensG/ADC7177M1 ↗ |
| A500KB | 250 | 193 | 2 | 447.8 × 139.25 mm | CC-BY-4.0 | HenrykRichter/A500KB ↗ |
| Kicad BOARD8 | 198 | 254 | 4 | 186 × 226 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| Kicad BOARD7 | 192 | 248 | 4 | 186 × 226 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| Kicad BOARD18 | 170 | 11 | 2 | 186 × 226 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| ZSWatch-Watch-DevKit | 132 | 149 | 4 | 100 × 70 mm | CC-BY-4.0 | ZSWatch/Watch-DevKit-HW ↗ |
| Kicad BOARD19 | 117 | 22 | 2 | 186 × 226 mm | CC-BY-4.0 | 2twToddWilson/kicad ↗ |
| WISDOM Node Hardware BOARD7 | 100 | 122 | 6 | 45 × 75 mm | CC-BY-4.0 | VTC-WISDOM/node_hardware ↗ |
| WISDOM Node Hardware BOARD6 | 96 | 122 | 6 | 45 × 75 mm | CC-BY-4.0 | VTC-WISDOM/node_hardware ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception