MountingHole_2.7mm_M2.5_DIN965
MountingHole
Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 5.2 × 5.2 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Nanovoltmeter BOARD4 | 552 | 382 | 6 | 150 × 100 mm | CC-BY-4.0 | curtisseizert/Nanovoltmeter ↗ |
| PETER | 419 | 389 | 4 | 180 × 110 mm | CC-BY-4.0 | dennowiggle/Retro-PETER ↗ |
| Lehmann TWIPR BOARD4 | 268 | 380 | 4 | 95 × 75 mm | CC-BY-4.0 | dustin-lehmann/TWIPR ↗ |
| Z80 Retro! - FLEADiP Board | 226 | 250 | 4 | 100 × 72 mm | CC-BY-4.0 | dennowiggle/FLEADiP ↗ |
| Inkjet Printer BOARD3 | 188 | 187 | 2 | 100 × 100 mm | CC-BY-4.0 | tuwrraphael/inkjet-printer ↗ |
| Allwinner V3s SBC | 171 | 193 | 4 | 66 × 42 mm | CC-BY-4.0 | vd-rd/sbc_allwinner_v3s ↗ |
| BigBoy | 123 | 302 | 4 | 160 × 100 mm | CC-BY-4.0 | transistorfet/retroverse ↗ |
| BigBoy | 120 | 302 | 4 | 160 × 100 mm | CC-BY-4.0 | transistorfet/retroverse ↗ |
| Tst | 119 | 223 | 4 | 60 × 40 mm | CC-BY-4.0 | Gidronaft/tst ↗ |
| Kami | 118 | 100 | 4 | 95 × 86 mm | CC-BY-4.0 | Nicolai-Electronics/kami-hardware ↗ |
| Retroverse BOARD7 | 111 | 306 | 4 | 160 × 100 mm | CC-BY-4.0 | transistorfet/retroverse ↗ |
| SEWER | 90 | 151 | 4 | 99.91 × 49.86 mm | CC-BY-4.0 | dennowiggle/Retro-PETER ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception