MountingHole_2.7mm_M2.5_DIN965_Pad
MountingHole
Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.2 × 5.2 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Current3x3A Artiq | 365 | 325 | 4 | 161 × 100 mm | CC-BY-4.0 | KLFAMO/current3x3A_Artiq ↗ |
| V2D | 337 | 301 | 4 | 161 × 100 mm | CC-BY-4.0 | KLFAMO/v2d ↗ |
| Current100A Artiq | 337 | 301 | 4 | 161 × 100 mm | CC-BY-4.0 | KLFAMO/current100A_Artiq ↗ |
| ULX5M Gs | 313 | 344 | 6 | 55 × 40 mm | CC-BY-4.0 | intergalaktik/ulx5m-gs ↗ |
| mmWave-radarBoard | 275 | 197 | 6 | 55 × 84.11 mm | CC-BY-4.0 | EmielV2002/mmWave-radarBoard ↗ |
| STM32 PLC BOARD2 | 270 | 208 | 4 | 100 × 100 mm | CC-BY-4.0 | DanielMartensson/STM32-PLC ↗ |
| STM32 PLC | 270 | 208 | 4 | 100 × 100 mm | CC-BY-4.0 | Arslan1st/STM32-PLC ↗ |
| Mariner 1-A | 266 | 332 | 6 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| Lab Scales Hardware BOARD16 | 257 | 161 | 4 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| Lab Scales Hardware BOARD15 | 257 | 161 | 4 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| Lab Scales Hardware BOARD14 | 255 | 158 | 4 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
| Lab Scales Hardware BOARD13 | 255 | 158 | 4 | 100 × 100 mm | CC-BY-4.0 | BroncoSpace-Lab/scales-hardware ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception