MountingHole_2.7mm_M2.5_ISO7380_Pad_TopBottom
MountingHole
Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5 × 5 mm
- Pads
- 1
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Electronics BOARD4 | 132 | 107 | 2 | 99 × 99 mm | CC-BY-4.0 | Fiberprinter/fiberprinter-electronics ↗ |
| ESPHome Parking Assistant | 114 | 103 | 4 | 85 × 59 mm | CC-BY-4.0 | mikelawrence/ESPHome-Parking-Assistant ↗ |
| Short Stack BOARD2 | 69 | 105 | 4 | 62.1 × 83.8 mm | CC-BY-4.0 | loopj/short-stack ↗ |
| Saleae Current Sensor | 54 | 33 | 4 | 64 × 40.37 mm | CC-BY-4.0 | zainahm3d/saleae-current-sensor ↗ |
| Rpi Breakout | 37 | 46 | 2 | 65 × 30 mm | CC-BY-4.0 | mtrudel/rpi-breakout ↗ |
| ESP32 Garage Door Controller | 30 | 40 | 2 | 85 × 59 mm | CC-BY-4.0 | mikelawrence/ESP32-Garage-Door-Controller ↗ |
| Lifi Project BOARD2 | 27 | 31 | 4 | 100 × 40 mm | CC-BY-4.0 | Gujilde163904STI/lifi-project ↗ |
| OLED_OEL1M4033FPC_A1 | 23 | 17 | 2 | 40 × 29 mm | CC-BY-4.0 | wangbo13/OSHW ↗ |
| Breakout Boards BOARD18 | 18 | 14 | 2 | 25.4 × 25.4 mm | CC-BY-4.0 | rhinocerose/breakout-boards ↗ |
| Breakout Boards BOARD19 | 18 | 14 | 2 | 25.4 × 25.4 mm | CC-BY-4.0 | rhinocerose/breakout-boards ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception