MountingHole_2.7mm_Pad_TopBottom
MountingHole
Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.9 × 5.9 mm
- Pads
- 1
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| DaisyRogue PCB BOARD2 | 235 | 243 | 2 | 190.88 × 99.84 mm | CC-BY-4.0 | robertsonics/DaisyRogue_PCB ↗ |
| DaisyRogue PCB | 75 | 81 | 2 | 60.96 × 69.85 mm | CC-BY-4.0 | robertsonics/DaisyRogue_PCB ↗ |
| Rocketry Flight Computer | 71 | 82 | 6 | 30 × 60 mm | CC-BY-4.0 | Pioneer-Rocketry/Flight-Computer ↗ |
| XUM-1541 | 28 | 27 | 2 | 60 × 60 mm | CC-BY-4.0 | Beaupre-Circuit-Design/c64-xum1541 ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception