MountingHole_2.7mm_Pad_Via
MountingHole
Mounting Hole 2.7mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.9 × 5.9 mm
- Pads
- 1
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| SmartWatchProject | 102 | 85 | 6 | 70 × 150 mm | CC-BY-4.0 | exysta/SmartWatchProject ↗ |
| RP2040 Drone BOARD3 | 100 | 104 | 2 | 57.49 × 78.32 mm | CC-BY-4.0 | Flynsky/RP2040-Drone ↗ |
| Multimeter Layout | 99 | 118 | 2 | 68 × 110 mm | CC-BY-4.0 | schuyler4/Multimeter ↗ |
| RP2040 Drone | 98 | 100 | 2 | 57.49 × 78.32 mm | CC-BY-4.0 | Flynsky/RP2040-Drone ↗ |
| Kfly Hat | 90 | 97 | 4 | 34.5 × 56 mm | CC-BY-4.0 | korken89/kfly_hat ↗ |
| Multimeter Layout | 86 | 124 | 2 | 68 × 110 mm | CC-BY-4.0 | schuyler4/Multimeter ↗ |
| 68k-SBC | 78 | 119 | 2 | 154.94 × 139.7 mm | CC-BY-4.0 | transistorfet/computie ↗ |
| Spur Project BOARD6 | 75 | 81 | 2 | 63.76 × 105.52 mm | CC-BY-4.0 | ericmutton/spur-project ↗ |
| G6ALU 20W Power Amplifier | 73 | 37 | 2 | 85 × 56 mm | CC-BY-4.0 | pa3gsb/Radioberry-2.x-extensions ↗ |
| 68k-SMT | 68 | 133 | 2 | 106.68 × 139.7 mm | CC-BY-4.0 | transistorfet/computie ↗ |
| Project BOARD2 | 64 | 36 | 2 | 40 × 40 mm | CC-BY-4.0 | shydql/project ↗ |
| MSO5000 Probe | 56 | 74 | 2 | 83.82 × 44.45 mm | CC-BY-4.0 | hefsoftware/MSO5000-Probe ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception