MountingHole_3.2mm_M3_ISO7380_Pad
MountingHole
Mounting Hole 3.2mm, M3, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 6.2 × 6.2 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Usb Ssb Txcvr | 664 | 707 | 6 | 300 × 200 mm | CC-BY-4.0 | alanmimms/usb-ssb-txcvr ↗ |
| Aero LTC6811 ESP32 BOARD8 | 592 | 489 | 2 | 320 × 55 mm | CC-BY-4.0 | tetra-aero/LTC6811_ESP32 ↗ |
| Extracellular Electrophysiology Test Board | 567 | 508 | 4 | 150 × 120 mm | CC-BY-4.0 | open-ephys/ephys-test-board ↗ |
| Antcontroller | 402 | 369 | 2 | 230 × 160 mm | CC-BY-4.0 | cr1tbit/antcontroller ↗ |
| Invictus2.0 Hardware BOARD20 | 381 | 254 | 6 | 150 × 60 mm | CC-BY-4.0 | PortoSpaceTeamNI/Invictus2.0_Hardware ↗ |
| mowi | 283 | 200 | 6 | 68.9 × 47.5 mm | CC-BY-4.0 | septentrio-gnss/mowi ↗ |
| DTS Board BOARD3 | 281 | 209 | 4 | 160 × 80 mm | CC-BY-4.0 | EBOThor/DTS_Board ↗ |
| OzzyBoard | 280 | 251 | 4 | 100 × 100 mm | CC-BY-4.0 | vbalsan/OzzyBoard ↗ |
| JBX16 | 266 | 309 | 4 | 244 × 183.35 mm | CC-BY-4.0 | jbaum81/JBX16 ↗ |
| Aero LTC6811 ESP32 BOARD3 | 266 | 234 | 2 | 130 × 90 mm | CC-BY-4.0 | tetra-aero/LTC6811_ESP32 ↗ |
| Aero LTC6811 ESP32 BOARD2 | 265 | 233 | 2 | 130 × 90 mm | CC-BY-4.0 | tetra-aero/LTC6811_ESP32 ↗ |
| Aero LTC6811 ESP32 | 264 | 230 | 2 | 130 × 90 mm | CC-BY-4.0 | tetra-aero/LTC6811_ESP32 ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception