MountingHole_3mm_Pad
MountingHole
Mounting Hole 3mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 6.5 × 6.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Hog | 370 | 217 | 2 | 215 × 100 mm | CC-BY-4.0 | shmoergh/hog ↗ |
| Hog BOARD2 | 361 | 204 | 2 | 215 × 100 mm | CC-BY-4.0 | shmoergh/hog ↗ |
| XYmatics E64 | 282 | 450 | 2 | 191.25 × 164 mm | CC-BY-4.0 | XyrusB2010/XYmatics-E64 ↗ |
| DingoPDM HW | 277 | 252 | 4 | 106.68 × 82.8 mm | CC-BY-4.0 | rusefi/DingoPDM_HW ↗ |
| Omega MSX2 BOARD2 | 265 | 421 | 2 | 333.38 × 149.86 mm | CC-BY-4.0 | merlinkv/Omega_MSX2 ↗ |
| Starfish | 262 | 165 | 4 | 100 × 100 mm | CC-BY-4.0 | AbijahKaj/kicanvas-react ↗ |
| Starfish | 262 | 165 | 4 | 100 × 100 mm | CC-BY-4.0 | wntrblm/jellyfish-and-starfish ↗ |
| Starfish | 261 | 169 | 4 | 100 × 100 mm | CC-BY-4.0 | theacodes/kicanvas ↗ |
| Hardware Mycroft Mark II BOARD2 | 235 | 172 | 4 | 67 × 98 mm | CC-BY-4.0 | MycroftAI/hardware-mycroft-mark-II ↗ |
| Creator ABU ROBOCON 2024 CIRCUITS | 225 | 126 | 2 | 175.28 × 166.22 mm | CC-BY-4.0 | ArunChaudhary-creator/ABU_ROBOCON_2024_CIRCUITS ↗ |
| Hog BOARD6 | 210 | 207 | 4 | 284 × 185.5 mm | CC-BY-4.0 | shmoergh/hog ↗ |
| Takuan Nlp BOARD13 | 174 | 351 | 2 | 209.55 × 154.94 mm | CC-BY-4.0 | cherry-takuan/nlp ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception