MountingHole_4.5mm
MountingHole
Mounting Hole 4.5mm, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 9.5 × 9.5 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Filatov EVD80 MCU PCB | 759 | 524 | 6 | 236 × 150 mm | CC-BY-4.0 | Alexandr-Filatov/EVD80_MCU_PCB ↗ |
| Quokka | 355 | 492 | 4 | 228.6 × 184.15 mm | CC-BY-4.0 | ChrisPVille/quokka ↗ |
| GDI 4ch | 280 | 298 | 4 | 154 × 160 mm | CC-BY-4.0 | tobsec/rusefi-hardware ↗ |
| All Spectrum Clones | 193 | 149 | 2 | 213 × 130 mm | CC-BY-4.0 | alvaroalea/all-spectrum-clones ↗ |
| Student Rocket Project Gen6 GSE Elec BOARD4 | 191 | 190 | 2 | 150 × 100 mm | CC-BY-4.0 | tokai-student-rocket-project/Gen6-GSE-Elec ↗ |
| Student Rocket Project Gen6 GSE Elec BOARD2 | 159 | 171 | 2 | 150 × 100 mm | CC-BY-4.0 | tokai-student-rocket-project/Gen6-GSE-Elec ↗ |
| Unicorne BOARD5 | 157 | 113 | 2 | 268 × 110.46 mm | CC-BY-4.0 | yanghu/unicorne ↗ |
| Unicorne BOARD4 | 149 | 113 | 2 | 268 × 110.46 mm | CC-BY-4.0 | yanghu/unicorne ↗ |
| Proteus Honda K 125 Adapter | 122 | 183 | 2 | 153 × 151.3 mm | CC-BY-4.0 | rusefi/proteus-Honda-K-125-adapter ↗ |
| Gameboy Dmg Pcb BOARD3 | 95 | 103 | 2 | 82.5 × 136.65 mm | CC-BY-4.0 | alxhoff/gameboy-dmg-pcb ↗ |
| OpenHornet BOARD15 | 91 | 83 | 2 | 110.26 × 171.75 mm | CC-BY-4.0 | Exprezz0/OpenHornet ↗ |
| F 18C Simulator BOARD15 | 91 | 83 | 2 | 110.26 × 171.75 mm | CC-BY-4.0 | Exprezz0/F-18C_Simulator ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception