MountingHole_4.5mm_Pad_TopOnly
MountingHole
Mounting Hole 4.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 9.5 × 9.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| IN12NixieClock Hardware | 167 | 295 | 2 | 198.12 × 80.77 mm | CC-BY-4.0 | MorrisYLin/IN12NixieClock-Hardware ↗ |
| DanceConIO | 106 | 109 | 2 | 79 × 57.25 mm | MIT | ravinrabbid/DanceCon2040 ↗ |
| BAJA 2024 2025 Firmware BOARD13 | 38 | 23 | 2 | 77.5 × 70.5 mm | CC-BY-4.0 | UofA-BAJA/2024-2025-Firmware ↗ |
| BAJA 2024 2025 Firmware BOARD12 | 13 | 7 | 2 | 82 × 43 mm | CC-BY-4.0 | UofA-BAJA/2024-2025-Firmware ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception